Oppo A17 CPH2477 spare parts

Technical Characteristics of Oppo A17 CPH2477 Repuestos

The Oppo A17 CPH2477 is a modern smartphone equipped with various components that might require replacement over time. Below are the key technical characteristics of the Oppo A17 CPH2477 repuestos (parts):

• Screen: 6.56 inches, IPS LCD, 720 x 1612 pixels
• Battery: Li-Po 5000 mAh, non-removable
• Camera: Dual 50 MP + 2 MP rear cameras, 5 MP front camera
• Processor: MediaTek MT6765 Helio G35
• Storage: 64GB internal, expandable with microSD
• RAM: 4GB
• Operating System: Android 12, ColorOS 12.1

Instructions to Replace Oppo A17 CPH2477 Repuestos

Tools Needed:

• Phillips Screwdriver
• Plastic Pry Tools
• Suction Cup
• Tweezers
• SIM Eject Tool
• Adhesive Tape (if needed)

General Safety Instructions:

• Power off your Oppo A17 before beginning any repairs.
• Use an anti-static wrist strap to prevent damage to electronic components.
• Work in a clean and organized environment.

Replacing the Screen:

Follow these steps to replace the screen of your Oppo A17:

• 1. Remove the SIM card tray using the SIM eject tool.
• 2. Heat the edges of the screen using a heat gun or hairdryer to soften the adhesive.
• 3. Use a suction cup to lift the screen slightly and insert a plastic pry tool to separate the screen from the frame.
• 4. Carefully detach the connectors from the screen to the motherboard using tweezers.
• 5. Remove the old screen and replace it with the new screen by connecting the connectors back to the motherboard.
• 6. Press the screen firmly all around to ensure it adheres properly to the frame.
• 7. Turn on your phone to test the new screen and ensure it works correctly.

Replacing the Battery:

Follow these steps to replace the battery of your Oppo A17:

• 1. Remove the back cover of the phone using a plastic pry tool.
• 2. Unscrew the screws securing the battery connector shield using a Phillips screwdriver.
• 3. Disconnect the battery connector from the motherboard using tweezers.
• 4. Peel off any adhesive securing the battery to the phone frame.
• 5. Carefully lift and remove the old battery using a plastic pry tool.
• 6. Insert the new battery and reconnect the battery connector to the motherboard.
• 7. Secure the battery connector shield back with screws.
• 8. Replace the back cover of the phone, ensuring it snaps into place securely.
• 9. Power on your phone to make sure the new battery functions properly.

These steps should help you in replacing the key components (repuestos) of the Oppo A17 CPH2477. Always take care while handling electronic parts to avoid any damage.