Oppo A38 4G spare parts

Oppo A38 4G Technical Characteristics and Replacement Instructions

Technical Characteristics

The Oppo A38 4G is designed with the following technical characteristics:

• Display: 6.5 inches, 720 x 1600 pixels
• Processor: Octa-core
• RAM: 4GB
• Storage: 64GB, expandable via microSDXC
• Battery: 5000 mAh, non-removable
• Operating System: Android 11, ColorOS 11.1
• Camera: Dual rear camera (13 MP + 2 MP), 8 MP front camera
• Connectivity: 4G, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0
• Ports: USB Type-C, 3.5mm headphone jack
• Sensors: Fingerprint (rear-mounted), accelerometer, proximity, compass

Instructions for Replacing Oppo A38 4G Repuestos

Follow these detailed instructions to replace parts (repuestos) of the Oppo A38 4G:

General Preparation

Before starting the replacement, ensure you have the following tools and parts:

• ESD wrist strap
• Plastic opening tools
• Phillips #00 screwdriver
• Tweezers
• Suction cup
• SIM card ejector tool
• Replacement parts (screen, battery, etc.)

Step-by-Step Replacement Process

1. Power Off and Remove SIM Tray

• Power off the Oppo A38 4G.
• Use the SIM card ejector tool to remove the SIM tray.

2. Open the Back Cover

• Use a suction cup to lift a corner of the back cover.
• Insert a plastic opening tool into the gap and slide it around the edges to release the clips.
• Carefully remove the back cover.

3. Disconnect Battery and Other Components

• Use a Phillips #00 screwdriver to remove the screws holding the protective shield over the connectors.
• Carefully lift and remove the shield.
• Disconnect the battery connector first to prevent any electrical damage.
• Disconnect other necessary connectors (e.g., display, cameras) depending on the part being replaced.

4. Replace the Faulty Component

• Follow specific instructions for the component you are replacing:
• Battery: Use a plastic tool to lift the old battery out and replace it with the new one.
• Display: Carefully remove the old display and install the new display by reconnecting its flex cable.
• Cameras: Disconnect the old camera module(s) and carefully place the new module(s) in position.

5. Reassemble the Phone

• Reconnect all connectors (battery, display, cameras).
• Replace the protective shield and secure it with screws.
• Reattach the back cover by pressing it firmly into place until all clips are secured.
• Reinsert the SIM tray.

6. Test the Replacement

• Power on the Oppo A38 4G.
• Ensure the replaced component functions correctly (e.g., the new display shows image, the battery charges, cameras work).

By following these detailed steps, you can replace the required parts in your Oppo A38 4G efficiently and safely.