Oppo A5 2020 CPH1931 spare parts

Technical Characteristics of Oppo A5 2020 (Model CPH1931) Components (Repuestos)

• Display: 6.5 inches, 720 x 1600 pixels, IPS LCD
• Processor: Qualcomm SDM665 Snapdragon 665 (11 nm)
• RAM: 3GB/4GB options
• Storage: 64GB/128GB, expandable via microSDXC
• Camera: Quad - 12 MP (wide), 8 MP (ultrawide), 2 MP (depth), 2 MP (monochrome)
• Battery: Li-Po 5000 mAh, non-removable
• Operating System: Android 9.0 (Pie), upgradable to Android 10; ColorOS 7.1
• Dimensions: 163.6 x 75.6 x 9.1 mm
• Weight: 195 g

Instructions for Replacing Oppo A5 2020 Components

1. Preparation

• Ensure your work area is clean and well-lit.
• Power off the device to prevent any electrical damage.
• Gather necessary tools: a set of precision screwdrivers, plastic opening tools, tweezers, and a heat gun or hair dryer.

2. Back Cover Removal

• Use the heat gun or hair dryer to heat the edges of the back cover to soften the adhesive.
• Insert a plastic opening tool between the back cover and the frame. Gently work your way around the edges to lift the cover.
• Once the adhesive is sufficiently loosened, carefully lift the back cover off.

3. Disconnect Battery

• Remove any screws securing the battery connector shield using a precision screwdriver.
• Lift the shield to reveal the battery connector.
• Use a plastic tool to disconnect the battery connector from the motherboard.

4. Remove Internal Components

• Remove screws securing the internal plastic covers and shields.
• Carefully disconnect ribbon cables and connectors using tweezers or a plastic tool. Label or memorize their positions.
• Lift out internal components such as the motherboard, cameras, and other modular parts as needed.

5. Replace the Desired Component

• Install the new component in the same orientation as the original part.
• Reconnect all ribbon cables and connectors securely.

6. Reassemble the Device

• Replace all internal covers and shields, securing them with screws.
• Reconnect the battery connector to the motherboard.
• Position the back cover correctly and press it into place. Apply gentle, even pressure to ensure the adhesive bonds properly.
• If necessary, reheat the edges to improve the adhesive seal.

7. Test the Device

• Power on the Oppo A5 2020.
• Test all functionalities related to the replaced component to ensure proper installation.