Oppo A53S spare parts

Technical Characteristics of Oppo A53S Repuestos

The Oppo A53S is a smartphone that features a variety of replaceable parts, commonly referred to as ""repuestos"". Below are some of its key technical characteristics:

• Screen: 6.5 inches, 720 x 1600 pixels, IPS LCD
• Battery: 5000 mAh, non-removable Li-Po
• Processor: Qualcomm SM4250 Snapdragon 460
• RAM: 4GB
• Storage: 64GB internal, expandable via microSDXC
• Camera: Triple camera setup (13 MP wide, 2 MP macro, 2 MP depth)
• Operating System: Android 10, ColorOS 7.2

Instructions for Replacing Oppo A53S Repuestos

1. Replacing the Screen

Follow these steps to replace the Oppo A53S screen:

• Turn off the phone and remove the SIM card tray.
• Use a heat gun or a hair dryer to soften the adhesive around the edges of the back cover.
• Carefully use a plastic pry tool to remove the back cover.
• Unscrew and remove the screws holding the internal protective cover.
• Disconnect the battery connector and the screen connector from the motherboard.
• Use a heat gun or hair dryer again to soften the adhesive on the front screen.
• Carefully pry off the damaged screen using a suction cup and a plastic pry tool.
• Clean any remaining adhesive from the frame.
• Apply new adhesive to the frame and carefully attach the new screen.
• Reconnect the screen connector and the battery connector to the motherboard.
• Replace the internal protective cover and secure it with screws.
• Reattach the back cover and press down firmly to ensure it adheres properly.
• Turn on the phone to test the new screen functionality.

2. Replacing the Battery

Follow these steps to replace the Oppo A53S battery:

• Turn off the phone and remove the SIM card tray.
• Use a heat gun or a hair dryer to soften the adhesive around the edges of the back cover.
• Carefully use a plastic pry tool to remove the back cover.
• Unscrew and remove the screws holding the internal protective cover.
• Disconnect the battery connector from the motherboard.
• Use a plastic card or a plastic pry tool to gently lift the old battery. Be careful not to puncture it.
• Place the new battery in the battery compartment and connect it to the motherboard.
• Replace the internal protective cover and secure it with screws.
• Reattach the back cover and press down firmly to ensure it adheres properly.
• Turn on the phone to test the new battery functionality.

3. Replacing the Camera Module

Follow these steps to replace the Oppo A53S camera module:

• Turn off the phone and remove the SIM card tray.
• Use a heat gun or a hair dryer to soften the adhesive around the edges of the back cover.
• Carefully use a plastic pry tool to remove the back cover.
• Unscrew and remove the screws holding the internal protective cover.
• Disconnect the battery connector and camera connector from the motherboard.
• Gently remove the old camera module and replace it with the new one.
• Reconnect the camera connector and the battery connector to the motherboard.
• Replace the internal protective cover and secure it with screws.
• Reattach the back cover and press down firmly to ensure it adheres properly.
• Turn on the phone to test the new camera module functionality.