Oppo A54 5G spare parts

Technical Characteristics of Oppo A54 5G Replacements

The Oppo A54 5G is a versatile and feature-rich smartphone. When it comes to replacing its parts, understanding the specific technical characteristics of each component is crucial. Below are some of the key replacement parts for this device:

Battery

Type: Lithium-Polymer
Capacity: 5000mAh
Voltage: 3.87V
Model: BLP829

Display

Type: IPS LCD
Size: 6.5 inches
Resolution: 1080 x 2400 pixels
Protection: Panda Glass

Camera Module

Rear Camera: 48MP + 8MP + 2MP + 2MP
Front Camera: 16MP

Charging Port

Type: USB-C
Compatibility: Supports fast charging up to 18W

Instructions for Replacing Oppo A54 5G Repuestos

Replacing parts on the Oppo A54 5G requires careful attention and the right tools. Follow these steps for a successful replacement:

Required Tools

• Phillips #00 Screwdriver
• Plastic Pry Tools
• Suction Cup
• SIM Card Eject Tool
• ESD Safe Tweezers
• Heat Gun or Hair Dryer (optional)

General Replacement Steps

• Power off the Oppo A54 5G and eject the SIM card tray using the SIM Card Eject Tool.
• Remove the back cover by gently heating the edges with a heat gun or hair dryer. Use a suction cup to lift the back cover while using plastic pry tools to detach the adhesive seals.
• Once the back cover is removed, disconnect the battery to prevent any short circuits. This can be done by carefully detaching the battery connector using the ESD safe tweezers.
• Unscrew the screws securing any brackets or components that need to be replaced using the Phillips #00 screwdriver. Keep track of where each screw came from as they may be different sizes.
• Carefully remove the faulty part and replace it with the new component. Ensure that all connectors are securely attached and that the part is properly aligned.
• Reassemble the phone by following the steps in reverse order. Reattach the battery connector, place the back cover, and reinsert the SIM card tray.
• Power on the device to ensure that the replacement part is functioning correctly.

Battery Replacement

• After disconnecting the battery, carefully lift the battery using a plastic pry tool. Be mindful of any adhesive securing the battery to the phone.
• Replace the old battery with the new one, ensuring that it is properly aligned and connected.
• Proceed with reassembly as outlined in the general steps.

Display Replacement

• Remove the screws and the bracket securing the display connectors.
• Disconnect the display connector and carefully remove the broken display.
• Install the new display, reconnect the display connector, and secure the bracket with screws.
• Reassemble the phone ensuring all parts are properly placed and fastened.

Camera Module Replacement

• Locate and unscrew the camera module bracket.
• Disconnect the camera module from the motherboard using ESD safe tweezers.
• Replace the faulty camera module with the new one, ensuring all connectors are properly secured.
• Reassemble the phone following the general steps.

By following these instructions carefully and using the appropriate tools, you can successfully replace parts on your Oppo A54 5G.