Oppo A58 4G spare parts

Oppo A58 4G Technical Characteristics and Replacement Instructions

Technical Characteristics of Oppo A58 4G Repuestos

The Oppo A58 4G is a well-engineered smartphone with the following main technical components that might need periodic replacement:

• Battery: 5000mAh Li-Po, non-removable.
• Display: 6.52 inches IPS LCD, 720 x 1600 pixels.
• Camera: Triple camera setup - 50 MP (primary), 2 MP (macro), 2 MP (depth).
• Processor: MediaTek Helio G85.
• RAM & Storage: 4GB/6GB RAM options with 64GB/128GB internal storage.
• Operating System: Android 11, ColorOS 11.1.
• Ports: USB Type-C, 3.5mm headphone jack.
• Other components: Earpiece, speaker, microphone, SIM tray.

Instructions on How to Replace Oppo A58 4G Repuestos

Tools Required:

• Precision screwdrivers
• Plastic opening tools
• Suction cup
• Tweezers
• Heat gun or hairdryer
• Adhesive strips

Steps to Replace the Battery:

1. Power off your Oppo A58 4G completely.
2. Remove the SIM tray using a SIM ejector tool.
3. Use a heat gun or hairdryer to gently heat the edges of the back cover to soften the adhesive.
4. Apply a suction cup to the back and carefully create a gap using a plastic opening tool.
5. Gently slide the opening tool around the edges to separate the back cover.
6. Unscrew the screws securing the motherboard shield using a precision screwdriver.
7. Disconnect the battery connector carefully with a plastic pry tool.
8. Use the pull tab to lift the old battery out or carefully pry it out if necessary.
9. Peel off the adhesive strips from the new battery and place it in position.
10. Reconnect the battery connector to the motherboard.
11. Screw the motherboard shield back in place.
12. Align the back cover and press it firmly to re-adhere it. Apply gentle heat if needed.
13. Reinsert the SIM tray and power on your device to test.

Steps to Replace the Screen:

1. Power off your Oppo A58 4G completely.
2. Remove the SIM tray using a SIM ejector tool.
3. Apply heat to the edges of the screen with a heat gun or hairdryer.
4. Attach a suction cup and lift to create a gap at the screen edges.
5. Carefully insert a plastic opening tool and slide it around to separate the screen from the frame.
6. Disconnect the display connector from the motherboard by removing any protective shields and screws.
7. Remove the faulty screen completely from the frame.
8. Place the new screen and connect it to the motherboard.
9. Secure any protective shields and screws that were removed.
10. Carefully align the new screen and press it to adhere firmly. Apply heat if necessary.
11. Reinsert the SIM tray and power on your device to test the new screen.

Important Tips:

• Always use high-quality replacement parts to ensure the longevity of your repair.
• Work on a clean, flat surface to avoid losing any small components.
• Keep track of screws and small parts using a magnetic mat or parts organizer.
• If you're unfamiliar with smartphone repairs, consider consulting a professional technician.

If you follow these instructions carefully, you should be able to replace the battery or screen of your Oppo A58 4G effectively.