Oppo A71 spare parts
There are 2 products.Technical Characteristics of Oppo A71 Repuestos
The Oppo A71 is a mid-range smartphone that features a variety of replaceable components. These components, commonly referred to as ""repuestos"", include the screen, battery, camera, and various internals. Below are the technical characteristics of some essential Oppo A71 repuestos:
Screen
Technical Characteristics of Oppo A71 Repuestos
The Oppo A71 is a mid-range smartphone that features a variety of replaceable components. These components, commonly referred to as ""repuestos"", include the screen, battery, camera, and various internals. Below are the technical characteristics of some essential Oppo A71 repuestos:
Screen
- Type: IPS LCD capacitive touchscreen
- Size: 5.2 inches
- Resolution: 720 x 1280 pixels
- Protection: Corning Gorilla Glass
Battery
- Type: Non-removable Li-Ion
- Capacity: 3000 mAh
Rear Camera
- Resolution: 13 MP, f/2.2, autofocus
- Features: LED flash, HDR, panorama
Front Camera
- Resolution: 5 MP, f/2.4
- Features: HDR
Other Internal Components
- Chipset: Qualcomm Snapdragon 450
- RAM: 3GB
- Storage: 16GB (expandable via microSD)
Instructions for Replacing Oppo A71 Repuestos
Replacing components of the Oppo A71 requires patience and attention to detail. Below are step-by-step instructions for replacing the screen and battery of the Oppo A71:
Replacing the Screen
- Power off your Oppo A71 and remove the SIM card tray.
- Using a plastic opening tool, carefully pry open the back cover starting from the bottom corner. Note: The back cover is secured with clips, so extra care is required to avoid damaging them.
- Once the back cover is removed, locate the screws securing the metal shield that covers the motherboard. Remove these screws with a Phillips screwdriver.
- Disconnect the battery connector to avoid any short circuit.
- Carefully disconnect the screen flex cables from the motherboard.
- Remove the damaged screen by gently prying it away from the phone frame. Apply heat using a heat gun or a hair dryer to soften the adhesive if needed.
- Once the old screen is removed, clean any residual adhesive on the phone frame.
- Apply new adhesive around the edges of the phone frame and carefully align and fit the new screen.
- Reconnect the screen flex cables to the motherboard and ensure they are securely connected.
- Reconnect the battery connector and reassemble the metal shield back over the motherboard.
- Snap the back cover back into place, ensuring all clips are secured.
- Re-insert the SIM card tray and power on the device to test the new screen.
Replacing the Battery
- Power off your Oppo A71 and remove the SIM card tray.
- Using a plastic opening tool, carefully pry open the back cover starting from the bottom corner. Note: The back cover is secured with clips, so extra care is required to avoid damaging them.
- Once the back cover is removed, locate the screws securing the metal shield that covers the motherboard. Remove these screws with a Phillips screwdriver.
- Disconnect the battery connector from the motherboard.
- Locate and gently peel off the adhesive strips that secure the battery in place. If necessary, use a heat gun or hair dryer to soften the adhesive.
- Gently lift and remove the old battery from the phone frame.
- Place the new battery into the frame, ensuring it seats properly with the adhesive strips.
- Reconnect the battery connector to the motherboard.
- Reassemble the metal shield over the motherboard and secure it with screws.
- Snap the back cover back into place, ensuring all clips are secured.
- Re-insert the SIM card tray and power on the device to test the new battery functionality.
Note: It is always recommended to back up your data before performing any replacements and to ensure you have the proper tools and replacement parts ready before starting the procedures.
Less More
Disponible
Disponible