Oppo A72 5G spare parts

Technical Characteristics of Oppo A72 5G Repuestos

Screen: 6.5 inches, LTPS IPS LCD, 1080 x 2400 pixels

Battery: Li-Po 4040 mAh, non-removable

Camera: Triple 16 MP + 8 MP + 2 MP (rear), 8 MP (front)

Processor: MediaTek MT6853V Dimensity 720 5G (7 nm)

RAM: 8GB

Storage: 128GB

Instructions on How to Replace Oppo A72 5G Repuestos

Note: Replacing parts on your Oppo A72 5G may void the warranty. Proceed with caution and at your own risk. Ensure you have the necessary tools and a clean workspace before beginning.

Required Tools

• Small Phillips screwdriver
• Plastic opening tool
• Suction cup
• Tweezers
• Adhesive strips
• Heat gun or hair dryer (for softening adhesive)

Steps to Replace the Battery

1. Turn off the phone.
2. Remove the SIM card tray.
3. Heat the edges of the back cover with a heat gun or hair dryer to soften the adhesive.
4. Use the suction cup to lift a corner of the back cover.
5. Carefully insert the plastic opening tool into the gap and work around the edges to detach the back cover.
6. Once the back cover is removed, use the Phillips screwdriver to unscrew the battery connector shield.
7. Disconnect the battery connector using the plastic opening tool or tweezers.
8. Gently lift the battery from the phone. Be careful not to bend or puncture the battery.
9. Remove any remaining adhesive from the battery compartment.
10. Place the new battery into the compartment, ensuring proper alignment of connectors.
11. Reconnect the battery connector and secure the shield with screws.
12. Use new adhesive strips to attach the back cover.
13. Press the back cover firmly to ensure a secure fit.

Steps to Replace the Screen

1. Turn off the phone.
2. Remove the SIM card tray.
3. Heat the edges of the front display with a heat gun or hair dryer to soften the adhesive.
4. Use the suction cup to lift a corner of the display.
5. Carefully insert the plastic opening tool into the gap and work around the edges to detach the display.
6. Once the display is removed, use the Phillips screwdriver to unscrew any screws securing the display connector shield.
7. Disconnect the display connector using the plastic opening tool or tweezers.
8. Lift away the broken display assembly.
9. Remove any remaining adhesive from the display frame.
10. Attach new adhesive strips to the frame.
11. Connect the new display's connector and secure the shield with screws.
12. Carefully align the new display and press it into place ensuring no gaps.

After completing the repair, reinsert the SIM card tray and turn on the phone to check that the new parts are functioning properly. If everything works well, you have successfully replaced the parts on your Oppo A72 5G.