Oppo A74 5G spare parts

Technical Characteristics of Oppo A74 5G Repuestos

Screen Replacement

Type: LCD, IPS

Size: 6.5 inches

Resolution: 1080 x 2400 pixels

Battery Replacement

Type: Li-Po

Capacity: 5000 mAh

Camera Module Replacement

Rear Camera: 48 MP, 2 MP, 2 MP

Front Camera: 16 MP

Instructions to Replace Oppo A74 5G Repuestos

Tools Needed

• Phillips screwdriver
• Plastic prying tool
• Suction cup
• SIM card ejector tool
• Tweezers
• Spudger

Screen Replacement Steps

• Step 1: Power off the phone and remove the SIM card tray using the SIM card ejector tool.
• Step 2: Use the suction cup to lift the screen slightly and insert the plastic prying tool between the screen and the back cover.
• Step 3: Gently work your way around the edges to separate the screen from the back cover.
• Step 4: Remove the screws securing the screen connector shield and remove the shield.
• Step 5: Disconnect the old screen and carefully replace it with the new screen, reconnecting the screen connectors.
• Step 6: Reassemble by reversing the steps and power on the device to check the new screen.

Battery Replacement Steps

• Step 1: Power off the phone and remove the SIM card tray using the SIM card ejector tool.
• Step 2: Use a plastic prying tool to open the back cover carefully.
• Step 3: Remove the screws securing the battery connector shield and remove the shield.
• Step 4: Disconnect the battery connector using a spudger.
• Step 5: Use the plastic prying tool to lift and remove the battery carefully.
• Step 6: Place the new battery into the slot and reconnect the battery connector.
• Step 7: Secure the battery connector shield back and reassemble by reversing the steps.

Camera Module Replacement Steps

• Step 1: Power off the phone and remove the SIM card tray using the SIM card ejector tool.
• Step 2: Open the back cover using a plastic prying tool and suction cup.
• Step 3: Remove the screws securing the camera module connector shield and remove the shield.
• Step 4: Disconnect the camera module connectors carefully using tweezers.
• Step 5: Remove the old camera module and replace it with the new one, ensuring the connectors are securely attached.
• Step 6: Reassemble by reversing the steps and power on the device to ensure the new camera module works correctly.