Oppo A77 5G CPH2339 spare parts

Technical Characteristics of Oppo A77 5G CPH2339 Repuestos

The Oppo A77 5G CPH2339 is a versatile smartphone equipped with advanced features. Here are the primary technical characteristics:

• Model Number: CPH2339
• 5G Capability: Yes
• Display: 6.56 inches, 720 x 1612 pixels
• Processor: MediaTek Dimensity 810
• RAM: 6GB
• Internal Storage: 128GB
• Battery: 5000mAh
• Rear Camera: 48 MP + 2 MP
• Front Camera: 8 MP

Instructions for Replacing Oppo A77 5G CPH2339 Repuestos

Tools and Materials Needed

• Plastic Spudger
• Phillips #00 Screwdriver
• SIM Card Ejector Tool
• Adhesive Strips
• Replacement Parts (e.g., screen, battery, etc.)
• Heat Gun or Hair Dryer
• Antistatic Wrist Strap

Step-by-Step Instructions

Follow these detailed instructions to replace the respective components of the Oppo A77 5G CPH2339:

1. Power Off the Device

Before starting the replacement process, ensure the phone is completely powered off to avoid any electrical damage.

2. Remove the SIM Card Tray

Using the SIM card ejector tool, remove the SIM card tray from the device.

3. Separate the Back Cover

• Use a heat gun or hair dryer to gently heat the edges of the phone's back cover. This helps in loosening the adhesive.
• Carefully insert a plastic spudger into the gap between the back cover and the mid-frame.
• Gently work your way around the edges to separate the back cover from the phone.

4. Disconnect the Battery

• Identify the battery connector on the motherboard and use a plastic spudger to gently lift and disconnect it.

5. Remove the Screws

• Using the Phillips #00 screwdriver, remove all the screws securing the mid-frame.
• Place the screws in a safe, organized manner as you will need them for reassembly.

6. Replace the Desired Component

Depending on the component being replaced (e.g., screen, battery, cameras), follow these specific steps for each:

Screen Replacement

• Disconnect the display connector from the motherboard.
• Gently pry away the old screen using a plastic spudger.
• Fit the new screen and reconnect the display connector.

Battery Replacement

• Carefully lift the old battery using the plastic spudger, starting from the edges.
• Avoid bending or puncturing the battery.
• Place the new battery in the compartment and reconnect the battery connector to the motherboard.

Camera Replacement

• Disconnect the camera connector and remove the old camera module.
• Install the new camera module and reconnect the connector to the motherboard.

7. Reassemble the Device

• Once the replacement is done, reattach the mid-frame by securing it with the screws you previously removed.
• Reconnect the battery connector if it was disconnected.
• Place the back cover on the device, ensuring it fits snugly with no gaps.
• Use adhesive strips if necessary to secure the back cover to the mid-frame.

8. Power On the Device

After reassembling, power on the device to ensure that the replacement component is functioning properly.

Congratulations! You have successfully replaced the needed components on your Oppo A77 5G CPH2339.