Oppo A78 5G CPH2483 CPH2495 spare parts

Technical Characteristics of Oppo A78 5G CPH2483 CPH2495 Repuestos

The Oppo A78 5G (CPH2483 and CPH2495) is known for its advanced technology and robust performance. Here are the key technical characteristics of Oppo A78 5G repuestos:

Screen Replacement

• Type: IPS LCD
• Size: 6.56 inches
• Resolution: 720 x 1612 pixels

Battery Replacement

• Type: Li-Po, non-removable
• Capacity: 5000 mAh
• Charging: 33W fast charging

Camera Replacement

• Main Camera: Dual 50 MP + 2 MP
• Selfie Camera: 8 MP

Other Important Components

• Chipset: MediaTek Dimensity 700
• Memory: 4GB/8GB RAM, 128GB storage
• Operating System: Android 12, ColorOS 12.1

Instructions for Replacing Oppo A78 5G CPH2483 CPH2495 Repuestos

Tools Needed

• Phillips #00 screwdriver
• Plastic opening tools
• Tweezers
• Spudger
• Suction cup

Steps for Screen Replacement

• Step 1: Power off your Oppo A78 5G completely before starting the replacement process.
• Step 2: Remove the SIM card tray using an ejection tool.
• Step 3: Use a suction cup to gently lift the back cover. Insert a plastic opening tool between the back cover and the phone frame to carefully pry it open.
• Step 4: Once the back cover is removed, use the Phillips #00 screwdriver to unscrew all the visible screws securing the mid-frame.
• Step 5: Disconnect the battery connector first to avoid any electrical damage.
• Step 6: Disconnect the display flex cable and other connectors securing the screen to the motherboard.
• Step 7: Use a heating pad to gently warm the edges of the screen, softening the adhesive.
• Step 8: Lift and remove the damaged screen with the suction cup and pry tools. Clean any remaining adhesive from the frame.
• Step 9: Place the new screen in position and reattach the display flex cable to the motherboard.
• Step 10: Reconnect the battery connector and reassemble the mid-frame by screwing all the screws back in place.
• Step 11: Carefully align and snap the back cover into place.
• Step 12: Power on your device and verify that the new screen is functioning correctly.

Steps for Battery Replacement

• Step 1: Follow steps 1 to 5 from the screen replacement process to safely remove the back cover and disconnect the battery connector.
• Step 2: Locate the adhesive pull-tabs at the base of the battery. Gently pull them to loosen the battery from the frame.
• Step 3: Use a plastic spudger to carefully pry the battery out. Avoid damaging the battery or the surrounding components.
• Step 4: Place the new battery in position and press it firmly to ensure it adheres properly to the frame.
• Step 5: Reconnect the battery connector and follow steps 10 to 12 from the screen replacement process to reassemble your device.

Steps for Camera Replacement

• Step 1: Follow steps 1 to 5 from the screen replacement process to safely remove the back cover and disconnect the battery connector.
• Step 2: Locate the camera module. Use the Phillips #00 screwdriver to unscrew any screws securing the camera module.
• Step 3: Use tweezers to carefully disconnect the camera flex cable from the motherboard.
• Step 4: Remove the faulty camera module and replace it with the new one, ensuring it is properly aligned.
• Step 5: Reconnect the camera flex cable and secure the camera module with screws.
• Step 6: Follow steps 10 to 12 from the screen replacement process to reassemble your device and verify that the new camera module is functioning correctly.