Oppo A7X spare parts

Technical Characteristics of Oppo A7X Spare Parts

The Oppo A7X is a mid-range smartphone known for its design and performance. Here are the key technical characteristics of its spare parts (repuestos):

1. Battery

Capacity: 4230 mAh

Type: Non-removable Li-Ion

2. Display

Type: LTPS IPS LCD

Size: 6.3 inches

Resolution: 1080 x 2340 pixels

3. Camera

Rear: 16 MP, f/1.8, PDAF

Front: 16 MP, f/2.0

4. Connectivity

SIM: Dual SIM (Nano-SIM, dual stand-by)

Bluetooth: 4.2, A2DP, LE

Charging Port: Micro USB 2.0

Instructions for Replacing Oppo A7X Spare Parts

Replacing spare parts in the Oppo A7X requires proper tools and careful handling. Follow these detailed instructions for a successful replacement process.

Tools Required

• Plastic opening tools
• Phillips #00 screwdriver
• Suction cup
• Tweezers
• Anti-static wrist strap (optional)

Steps to Replace the Battery

• 1. Power off the device.
• 2. Remove the SIM card tray using the ejection tool.
• 3. Use a plastic opening tool to gently pry open the back cover starting from the bottom corner.
• 4. Disconnect the battery connector using tweezers.
• 5. Use the Phillips #00 screwdriver to remove the screws holding the battery in place.
• 6. Carefully lift the battery using the plastic opening tool. Do not puncture the battery.
• 7. Align the new battery in the slot and secure it with screws.
• 8. Reconnect the battery connector.
• 9. Snap the back cover back into place until it clicks.
• 10. Insert the SIM card tray back in place.

Steps to Replace the Display

• 1. Power off the device.
• 2. Remove the SIM card tray using the ejection tool.
• 3. Use a plastic opening tool to gently pry open the back cover starting from the bottom corner.
• 4. Disconnect the battery connector and remove the battery as detailed above.
• 5. Using the Phillips #00 screwdriver, remove screws securing the display assembly.
• 6. Utilize the suction cup to gently lift and remove the screen assembly from the frame.
• 7. Detach the display connector carefully.
• 8. Attach the new display to the display connector.
• 9. Place the new display on the frame and secure it with screws.
• 10. Reconnect the battery connector, install the battery, and snap the back cover back in place.
• 11. Insert the SIM card tray back in place.

Steps to Replace the Rear Camera

• 1. Power off the device.
• 2. Remove the SIM card tray using the ejection tool.
• 3. Use a plastic opening tool to gently pry open the back cover starting from the bottom corner.
• 4. Disconnect the battery connector and remove the battery as detailed above.
• 5. Using the Phillips #00 screwdriver, remove screws securing the rear camera assembly.
• 6. Carefully disconnect the camera connectors.
• 7. Remove the camera module using the tweezers.
• 8. Place the new camera module in the slot and reconnect the camera connectors.
• 9. Secure the new camera module with screws.
• 10. Reconnect the battery connector, install the battery, and snap the back cover back in place.
• 11. Insert the SIM card tray back in place.

Ensure all components are securely connected before powering on the device. Handle all parts and tools with care to avoid damage.