Oppo A91 spare parts

Technical Characteristics of Oppo A91 Repuestos

1. Display Screen

Size: 6.4 inches
Resolution: 2400 x 1080 pixels
Type: AMOLED
Protection: Corning Gorilla Glass 5

2. Battery

Capacity: 4025 mAh
Type: Li-Po, non-removable
Charging: VOOC 3.0 fast charging, 20W

3. Rear Camera Module

Main Sensor: 48 MP, f/1.8
Ultra-Wide Sensor: 8 MP, f/2.2
Macro & Depth Sensors: 2 MP + 2 MP, f/2.4

4. Front Camera

Sensor: 16 MP, f/2.0

5. Other Components

• Charging Port Assembly
• Fingerprint Sensor
• Volume and Power Buttons
• Speaker Assembly

Instructions on How to Replace Oppo A91 Repuestos

1. Display Screen Replacement

• Power off your device completely.
• Remove the SIM card tray using a SIM ejector tool.
• Use a heat gun or hairdryer to gently heat the edges of the display.
• Carefully use a plastic pry tool to lift the display away from the frame.
• Disconnect the display cable and remove the old display.
• Connect the new display cable and fit the new display into the frame.
• Press along the edges to secure the new display and ensure there are no gaps.
• Reinsert the SIM card tray and power on the device to test.

2. Battery Replacement

• Power off your device and remove the SIM card tray.
• Remove the back cover using a plastic pry tool.
• Disconnect the battery connector.
• Remove any screws holding the battery in place.
• Carefully lift the old battery using a pull tab, if available.
• Install the new battery and connect the battery connector.
• Reattach the back cover and insert the SIM card tray.
• Power on the device and check battery functionality.

3. Rear Camera Module Replacement

• Power off your device and remove the SIM card tray.
• Remove the back cover using a plastic pry tool.
• Locate and disconnect the camera module connectors.
• Remove the screws securing the camera module.
• Carefully detach the old camera module.
• Install the new camera module and reattach the screws.
• Connect the new camera module connectors.
• Reattach the back cover and insert the SIM card tray.
• Power on the device and test the camera functionality.

4. Charging Port Assembly Replacement

• Power off your device and remove the SIM card tray.
• Remove the back cover using a plastic pry tool.
• Locate the charging port assembly and disconnect its cables.
• Remove any screws securing the charging port assembly.
• Carefully remove the old charging port assembly.
• Install the new charging port assembly and secure it with screws.
• Connect all necessary cables to the new charging port assembly.
• Reattach the back cover and insert the SIM card tray.
• Power on the device and test the charging functionality.