Oppo A94 5G CPH2211 spare parts

Technical Characteristics of Oppo A94 5G CPH2211 Repuestos

Here are the primary technical specifications for the replacement parts of the Oppo A94 5G CPH2211:

• Display: 6.43 inches AMOLED, 1080 x 2400 pixels resolution
• Processor: MediaTek MT6853 Dimensity 800U 5G
• RAM: 8GB
• Internal Storage: 128GB
• Front Camera: 32MP
• Rear Camera: Quad setup - 48MP + 8MP + 2MP + 2MP
• Battery: Li-Po 4310 mAh, non-removable
• Operating System: Android 11, ColorOS 11.1

Instructions on How to Replace Oppo A94 5G CPH2211 Repuestos

Tools Needed:

• Small Phillips screwdriver
• Plastic pry tool
• SIM card ejector tool
• Tweezers
• Adhesive strips
• Anti-static wrist strap

Instructions:

Before beginning any repair, ensure the phone is powered off to avoid any damage or injury.

1. Remove SIM Tray
   • Use the SIM card ejector tool to remove the SIM tray from the phone.
2. Remove the Back Cover
   • Insert the plastic pry tool between the back cover and the phone frame.
   • Gently slide the pry tool around the edges to release the clips holding the back cover.
3. Disconnect the Battery
   • Using the Phillips screwdriver, remove the screws securing the battery connector shield.
   • Carefully detach the battery connector using the plastic pry tool.
4. Replace the Faulty Part
   • Depending on the part being replaced (e.g., display, camera, battery), locate the screws and connectors holding the part in place.
   • Remove the screws and gently disconnect any connectors with the plastic pry tool or tweezers.
   • Replace the faulty part with the new one, securing it with screws and reconnecting any necessary connectors.
5. Reconnect the Battery
   • Reattach the battery connector carefully, ensuring it clicks into place.
   • Secure the battery connector shield with the screws previously removed.
6. Reattach the Back Cover
   • Align the back cover with the phone frame and press it firmly around the edges to secure the clips.
7. Reinsert SIM Tray
   • Place the SIM card back into the tray and reinsert it into the phone.

After completing these steps, power on the phone to ensure the replacement part is functioning correctly. If the device does not power on or exhibits any issues, double-check all connections and screws.

Conclusion

Replacing parts in the Oppo A94 5G CPH2211 can be done with patience and care. Always work in a clean, well-lit environment and take precautions to prevent static discharge by using an anti-static wrist strap.