Oppo A96 4G CPH2333 spare parts

Technical Characteristics of Oppo A96 4G CPH2333 Repuestos

The Oppo A96 4G CPH2333 is a powerful smartphone designed to offer high performance and great user experience. The technical characteristics of its repuestos (replacement parts) are detailed below:

Screen

• Type: IPS LCD
• Size: 6.59 inches
• Resolution: 1080 x 2412 pixels

Battery

• Type: Li-Po
• Capacity: 5000 mAh
• Charging: Fast charging 33W

Camera

• Main Camera: Dual 50 MP + 2 MP
• Front Camera: 16 MP

Memory

• RAM: 6GB/8GB
• Internal Storage: 128GB/256GB
• Expandable: MicroSDXC

Processor

• Chipset: Qualcomm SM6225 Snapdragon 680
• CPU: Octa-core (4x2.4 GHz Kryo 265 Gold & 4x1.9 GHz Kryo 265 Silver)
• GPU: Adreno 610

Instructions to Replace Oppo A96 4G CPH2333 Repuestos

Replacing components of your Oppo A96 4G can be a meticulous task. Follow the detailed instructions below:

Tools Required:

• Phillips screwdriver
• Plastic opening tools
• Tweezers
• Suctions cup
• Spudger
• Heat gun or Hairdryer
• Anti-static wrist strap (optional but recommended)

Step-by-Step Replacement Guide:

1. Preparation

• Power off your Oppo A96 4G and remove the SIM card tray using a SIM ejector tool.
• Ensure you have a clean, static-free workspace.

2. Removing the Back Cover:

• Use a heat gun or hairdryer to soften the adhesive around the back cover for about 2-3 minutes.
• Carefully use a suction cup to create a gap between the back cover and the phone frame.
• Insert a plastic opening tool into the gap and gently slide it around to separate the back cover from the phone.
• Once all the adhesive is loosened, lift the back cover carefully.

3. Disconnect Battery:

• Locate the battery connector, typically covered by a shield held with Phillips screws.
• Remove the screws and the shield, then use a plastic spudger to disconnect the battery connector.

4. Replacing Specific Components:

Screen Replacement:

• Disconnect all flex cables attached to the motherboard, including the screen cable.
• Use the heat gun again to soften the adhesive under the screen.
• Carefully use a suction cup and a plastic opening tool to lift off the screen.
• Replace with the new screen, reconnect the flex cables, and reassemble the phone.

Battery Replacement:

• After disconnecting the battery, use a plastic card or spudger to lift the battery from its adhesive.
• Replace with a new battery, ensuring it is properly aligned with the contacts.
• Reconnect the battery flex cable and reassemble the phone.

5. Reassemble:

• Reverse the disassembly steps to reassemble your Oppo A96 4G.
• Ensure all connectors are properly reconnected.
• Align and press the back cover firmly to secure the adhesive or replace with new adhesive if needed.

Enjoy your repaired Oppo A96 4G! Make sure to follow these instructions carefully to avoid any damage.