Oppo F1S spare parts

Technical Characteristics of Oppo F1S Repuestos

The Oppo F1S is well-known for its sleek design and robust performance. When it comes to replacement parts (Repuestos), understanding each component's technical specifications is crucial for an effective repair. Below are some key characteristics of common Oppo F1S components.

Display Assembly

• Type: IPS LCD capacitive touchscreen
• Size: 5.5 inches
• Resolution: 720 x 1280 pixels
• Protection: Corning Gorilla Glass 4

Battery

• Capacity: 3075 mAh
• Type: Non-removable Li-Po battery

Rear Camera

• Resolution: 13 MP
• Features: Phase detection autofocus, LED flash

Front Camera

• Resolution: 16 MP
• Features: 1/3.1"" sensor size, 1.0 µm pixel size

Instructions for Replacing Oppo F1S Repuestos

Replacing parts in the Oppo F1S can be a complex process. Follow these detailed instructions to safely replace the most common components.

Tools Required

• Screwdriver set
• Plastic opening tools
• Spudger
• Tweezers
• Suction cup

Steps to Replace the Display Assembly

• 1. Power off the device and remove the SIM card tray.
• 2. Use a screwdriver to remove the screws near the charging port.
• 3. Carefully use a suction cup to lift the front display assembly away from the body.
• 4. Disconnect the battery connector first to avoid any short circuits.
• 5. Slowly disconnect the display assembly by carefully taking off the connectors.
• 6. Replace the new display assembly and connect the cables back.
• 7. Reattach the battery connector.
• 8. Fit the display back into place and screw back the screws near the charging port.

Steps to Replace the Battery

• 1. Start by powering off the phone and removing the SIM card tray.
• 2. Unscrew the bottom screws and use plastic opening tools to lift the back cover.
• 3. Disconnect the battery connector using a spudger.
• 4. Carefully lift the battery using a plastic tool to avoid damage to internal components.
• 5. Insert the new battery and connect the battery connector.
• 6. Secure the back cover and screw in the bottom screws.

Steps to Replace the Rear Camera

• 1. Power off the device and remove the SIM card tray.
• 2. Use screwdrivers to remove screws and detach the back cover.
• 3. Locate the rear camera module and disconnect its connector.
• 4. Carefully remove the old camera module.
• 5. Place the new camera module in position and connect the connector.
• 6. Secure the back cover and replace the screws.