Oppo Find N3 Flip spare parts

Technical Characteristics of Oppo Find N3 Flip Repuestos

The Oppo Find N3 Flip is equipped with advanced features and components designed to provide optimal performance and user experience. Here are the main technical characteristics of its repuestos (replacement parts):

• Screen: 6.7-inch AMOLED, 1080 x 2400 pixels
• Battery: 4500 mAh, non-removable, fast charging 65W
• Camera: Triple 50MP + 8MP + 2MP, LED flash, HDR, panorama
• Processor: Qualcomm Snapdragon 888, Octa-core
• Memory: 8GB RAM, 256GB internal storage
• Operating System: Android 12, ColorOS 12.1
• Connectivity: Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.2, USB Type-C

Instructions on How to Replace Oppo Find N3 Flip Repuestos

Replacing the Battery

Follow these step-by-step instructions to replace the battery:

• Step 1: Power off your Oppo Find N3 Flip to prevent any electrical hazards.
• Step 2: Use a SIM card ejector tool to remove the SIM card tray from the device.
• Step 3: Use a heat gun or a hairdryer to heat the edges of the back cover to soften the adhesive.
• Step 4: Carefully use a suction cup and a plastic pry tool to lift and remove the back cover.
• Step 5: Remove the screws that secure the battery connector shield using a Phillips screwdriver.
• Step 6: Disconnect the battery connector using a plastic spudger.
• Step 7: Carefully lift the battery out of the device, avoiding any puncture.
• Step 8: Place the new battery in the compartment and reconnect the battery connector.
• Step 9: Replace the battery connector shield and screws.
• Step 10: Re-apply adhesive to the back cover and press firmly to secure it in place.
• Step 11: Reinsert the SIM card tray and power on the device to ensure the new battery is functioning correctly.

Replacing the Screen

Follow these step-by-step instructions to replace the screen:

• Step 1: Power off your Oppo Find N3 Flip and remove the SIM card tray.
• Step 2: Heat the edges of the back cover with a heat gun or hairdryer to soften the adhesive.
• Step 3: Use a suction cup and plastic pry tool to gently lift and remove the back cover.
• Step 4: Unscrew the screws securing the mid-frame and remove it carefully.
• Step 5: Disconnect the battery connector to cut off power to the device.
• Step 6: Detach the display connector using a spudger or plastic tool.
• Step 7: Apply heat around the edges of the screen to soften the adhesive holding it in place.
• Step 8: Use a suction cup and pry tool to separate the screen from the frame carefully.
• Step 9: Place the new screen and connect it securely to the display connector.
• Step 10: Reinstall the mid-frame and screw it back in place.
• Step 11: Reconnect the battery connector and replace the back cover, securing it with adhesive.
• Step 12: Power on the device to check the functionality of the new screen.