Oppo Find X2 Neo spare parts

Technical Characteristics of Oppo Find X2 Neo Replacement Parts (Repuestos)

The Oppo Find X2 Neo is a high-end smartphone featuring a variety of replacement parts (repuestos) to ensure the device continues to function optimally. Below are the technical characteristics of key replacement parts:

• Main Display: 6.5-inch AMOLED, 2400 x 1080 pixels resolution, 90Hz refresh rate.
• Battery: Li-Po 4025 mAh, non-removable, with 30W VOOC 4.0 fast charging capability.
• Rear Camera Module: Quad camera setup - 48 MP (wide), 13 MP (telephoto), 8 MP (ultrawide), 2 MP (depth).
• Front Camera: 32 MP, HDR, 1080p video recording at 30fps.
• Motherboard: Equipped with Qualcomm Snapdragon 765G chipset, 12GB RAM, and 256GB internal storage.
• Charging Port: USB Type-C 1.0 reversible connector.

Instructions to Replace Oppo Find X2 Neo Replacement Parts

Replacing parts in the Oppo Find X2 Neo requires precision and the right tools. Below is a detailed guide on how to replace various parts:

Replacing the Display

• Power off the device completely.
• Use a SIM ejector tool to remove the SIM card tray.
• Use a heat gun or hairdryer to heat the edges of the screen to soften the adhesive.
• Carefully insert a plastic prying tool between the screen and the frame to detach the display. Work around the edges to lift the screen without applying too much force.
• Disconnect the display cable from the motherboard gently by releasing the latch.
• Take the new display and reconnect it to the motherboard.
• Position the new display correctly and press it down to secure it with the adhesive.
• Power on the device to check if the display is working properly before fully sealing it.

Replacing the Battery

• Power off the device and remove the SIM card tray.
• Remove the back cover using a plastic prying tool. Start from one corner and work around the edges to release the clips.
• Locate the battery connectors and disconnect them carefully from the motherboard.
• Lift the battery gently from the compartment. Be cautious of the adhesive holding the battery in place.
• Place the new battery in the compartment and reconnect the battery connectors to the motherboard.
• Reinstall the back cover by aligning it properly and pressing down along the edges to secure it.
• Power on the device to ensure the new battery is functioning correctly.

Replacing the Charging Port

• Power off the device and remove the SIM card tray.
• Use a plastic prying tool to remove the back cover by gently working around the edges.
• Remove any screws securing the charging port module to the frame.
• Disconnect the ribbon cable connecting the charging port to the motherboard.
• Carefully lift the charging port module out of its position.
• Place the new charging port module in the empty slot and secure it with screws.
• Reconnect the ribbon cable to the motherboard.
• Replace the back cover, ensuring all clips are securely fastened.
• Power on the device to test the new charging port functionality.