Oppo Find X2 Pro spare parts

Below are the technical characteristics and detailed replacement instructions for Oppo Find X2 Pro parts (repuestos).

Technical Characteristics of Oppo Find X2 Pro Repuestos

Display

Type: AMOLED capacitive touchscreen, 1B colors

Size: 6.7 inches

Resolution: 1440 x 3168 pixels

Protection: Corning Gorilla Glass 6

Battery

Type: Li-Po 4260 mAh, non-removable

Charging: Fast charging 65W, 100% in 38 min

Camera

Primary: Triple: 48 MP (wide), 13 MP (periscope telephoto), 48 MP (ultrawide)

Features: LED flash, HDR, panorama

Video: 4K@30/60fps, 1080p@30/60fps, gyro-EIS, HDR

Instructions for Replacing Oppo Find X2 Pro Repuestos

Tools and Materials Required

• Pry tools
• Tweezers
• Screwdriver set
• Adhesive strips
• Anti-static wrist strap
• Replacement parts (e.g., display, battery)

Step-by-Step Replacement Instructions

1. Power Off and Disassemble

• Power off your Oppo Find X2 Pro.
• Remove the SIM card tray using the ejector tool.
• Use a heat gun or hairdryer to soften the adhesive around the back cover.
• Carefully insert a pry tool between the back cover and the frame to open it.
• Remove the back cover and set it aside.

2. Disconnect the Battery

• Remove the screws securing the metal shield over the motherboard connectors.
• Use tweezers to lift off the shield.
• Disconnect the battery connector from the motherboard.

3. Replace the Display

• Remove the screws securing the display connector bracket.
• Disconnect the display connector from the motherboard.
• Apply heat to the front to soften the adhesive holding the display in place.
• Use a pry tool to carefully detach the display from the frame.
• Clean any residual adhesive from the frame.
• Position the new display onto the frame and press firmly to secure the adhesive.
• Reconnect the display connector and secure it with the bracket and screws.

4. Replace the Battery

• If replacing the battery, gently lift the old battery from the shell (do not puncture).
• Place the new battery into the phone.
• Reconnect the battery connector to the motherboard.

5. Reassemble the Device

• Reinstall the metal shield over the motherboard connectors and secure it with screws.
• Replace the back cover and press down firmly to secure the adhesive.
• Reinsert the SIM card tray.
• Power on your Oppo Find X2 Pro to test the new parts.

Following these steps carefully will help you successfully replace parts on your Oppo Find X2 Pro.