Oppo Find X2 spare parts

Technical Characteristics of Oppo Find X2 Repuestos

The Oppo Find X2 is known for its robust design and high-performance components. Below are the technical specifications of the various replacement parts (repuestos) available for the Oppo Find X2:

• Screen: 6.7 inches AMOLED capacitive touchscreen, 1440 x 3168 pixels, 120Hz refresh rate
• Battery: Li-Po 4200 mAh, non-removable, supports 65W fast charging
• Rear Camera: Triple camera setup - 48 MP (wide), 13 MP (periscope telephoto), 12 MP (ultrawide)
• Front Camera: 32 MP, wide-angle
• Processor: Qualcomm Snapdragon 865
• Memory: 12GB RAM, 256GB ROM
• Operating System: Android 10, upgradable to Android 11

Instructions on How to Replace Oppo Find X2 Repuestos

1. Screen Replacement

Replacing the screen of the Oppo Find X2 is a delicate process. Follow the steps below carefully:

• Power off the device completely.
• Use a SIM ejector tool to remove the SIM card tray.
• Use a heat gun or hairdryer to gently heat the edges of the screen to soften the adhesive.
• Employ a plastic separation tool to carefully pry open the screen from the frame.
• Disconnect the battery and screen connectors on the motherboard.
• Remove the faulty screen and replace it with the new one, ensuring all connectors are properly attached.
• Reconnect the battery and screen connectors, then reassemble the device in reverse order.
• Power on the device to test the new screen.

2. Battery Replacement

The battery replacement steps are as follows:

• Turn off the Oppo Find X2 and remove the SIM card tray using the SIM ejector tool.
• Gently heat the back cover with a heat gun or hairdryer to loosen the adhesive.
• Use a suction cup and plastic prying tool to lift the back cover off the device.
• Disconnect the battery connector from the motherboard.
• Remove any screws holding the battery in place.
• Use a plastic tool to carefully lift the battery out of its compartment.
• Insert the new battery, ensuring it is properly aligned and connected.
• Reattach the back cover, applying gentle pressure to secure it in place.
• Power on the device to check if the new battery is functioning correctly.

3. Rear Camera Replacement

Follow these steps to replace the rear camera:

• Turn off your device and remove the SIM card tray.
• Gently heat the back cover with a heat gun or hairdryer to loosen the adhesive.
• Use a suction cup and plastic prying tool to lift the back cover off the device.
• Locate the camera assembly and disconnect its connector from the motherboard.
• Remove any screws or fastenings securing the camera module in place.
• Lift the old camera module out and insert the new one, ensuring it is securely fastened and connected.
• Reattach the back cover, applying gentle pressure to secure it in place.
• Power on the device to ensure the new camera is working properly.

4. Front Camera Replacement

To replace the front camera, follow these instructions:

• Turn off the device and remove the SIM card tray with the SIM ejector tool.
• Heat the back cover edges gently with a heat gun or hairdryer to soften the adhesive.
• Use a suction cup and prying tool to carefully detach the back cover.
• Disconnect and remove the motherboard to access the front camera module.
• Detach the front camera connector and carefully lift the camera module out.
• Insert the new front camera and secure its connector to the motherboard.
• Reassemble the motherboard and back cover, ensuring all screws and connectors are secure.
• Power on the device and test the new front camera.