Oppo Find X3 5G spare parts

Technical Characteristics of Oppo Find X3 5G Repuestos

Screen

Type: AMOLED, 1B colors

Size: 6.7 inches

Resolution: 1440 x 3216 pixels

Battery

Type: Li-Po 4500 mAh, non-removable

Charging: Fast charging 65W, 40% in 10 min

Wireless Charging: Fast wireless charging 30W

Cameras

Rear Cameras:

• 50 MP, f/1.8, 26mm (wide)
• 13 MP, f/2.4, 52mm (telephoto)
• 50 MP, f/2.2, 16mm (ultrawide)
• 3 MP, f/3.0, (microscope)

Front Camera: 32 MP, f/2.4, 26mm (wide)

Processor

Chipset: Qualcomm SM8350 Snapdragon 888 5G

CPU: Octa-core

GPU: Adreno 660

Instructions on How to Replace Oppo Find X3 5G Repuestos

Replacing the Screen

• Turn off the device and remove the SIM card tray.
• Use a heat gun or a hairdryer to soften the adhesive around the edges of the screen.
• Carefully use a plastic opening tool to lift the screen from the frame, starting at one corner.
• Disconnect the screen's flex cable from the motherboard gently.
• Remove the old screen and align the new screen in place.
• Connect the new screen's flex cable to the motherboard.
• Gently press the screen into the frame, ensuring it's aligned correctly.
• Power on the device to test the new screen. If it works, turn it off and reassemble any remaining components.

Replacing the Battery

• Turn off the device and remove the SIM card tray.
• Unscrew and remove the back cover using an appropriate screwdriver.
• Locate the battery connector and gently disconnect it from the motherboard.
• Use a plastic tool to carefully pry the battery out of its adhesive. Do not use metal tools to avoid puncturing the battery.
• Remove the old battery and place the new battery in position.
• Reconnect the battery connector to the motherboard.
• Screw the back cover back onto the device securely.
• Power on the device to ensure the new battery is working correctly.

Replacing the Rear Camera

• Turn off the device and remove the SIM card tray.
• Unscrew and remove the back cover using an appropriate screwdriver.
• Locate and disconnect the camera module connectors on the motherboard.
• Gently remove the camera module from its socket.
• Place the new camera module into the socket and connect its connectors to the motherboard.
• Screw the back cover back onto the device securely.
• Power on the device to test the new camera module and ensure it functions correctly.