Oppo Find X3 Lite 5G spare parts

Technical Characteristics of Oppo Find X3 Lite 5G Replacement Parts (Repuestos)

The Oppo Find X3 Lite 5G is known for its sleek design and advanced features. When it comes to replacing parts, here are some key technical characteristics:

• Display: 6.43 inches, AMOLED, 1080 x 2400 pixels
• Battery: Non-removable Li-Po 4300 mAh
• Main Camera: Quad 64 MP, 8 MP, 2 MP, 2 MP
• Front Camera: 32 MP
• Processor: Qualcomm SM7250-AC Snapdragon 765G 5G
• Memory: 128GB 8GB RAM
• Operating System: Android 11, ColorOS 11.1

Instructions for Replacing Oppo Find X3 Lite 5G Parts (Repuestos)

Replacing components of the Oppo Find X3 Lite 5G requires precision and care. Below are detailed steps for replacing the most commonly needed parts:

1. Replacing the Display

• Step 1: Power off your phone and remove any SIM card trays.
• Step 2: Use a heat gun or a hairdryer to soften the adhesive around the edges of the back cover.
• Step 3: Carefully insert a plastic prying tool between the back cover and the phone frame. Slowly work your way around to lift the back cover.
• Step 4: Disconnect the battery connector to avoid any short circuits.
• Step 5: Unscrew the screws holding the protective cover over the motherboard. Then remove the cover to access the display connector.
• Step 6: Disconnect the display connector from the motherboard.
• Step 7: Use a suction cup to lift the old display gently, and remove any remaining adhesive on the frame.
• Step 8: Apply new adhesive to the frame and carefully align the new display.
• Step 9: Reconnect the display connector and secure it with the protective cover and screws.
• Step 10: Reconnect the battery connector, then reattach the back cover using fresh adhesive.
• Step 11: Power on the phone to test the new display.

2. Replacing the Battery

• Step 1: Turn off the device and remove any SIM card trays.
• Step 2: Use a heat gun or hairdryer to heat the perimeter of the back cover to soften the adhesive.
• Step 3: Insert a plastic prying tool to lift the back cover gently.
• Step 4: Unscrew the screws securing the protective cover over the battery connector and motherboard.
• Step 5: Disconnect the battery connector to avoid short circuits.
• Step 6: Peel off any adhesive strips securing the battery in place.
• Step 7: Lift the old battery out carefully, ensuring not to puncture it.
• Step 8: Insert the new battery, ensuring it is aligned correctly.
• Step 9: Reconnect the battery connector and secure the protective cover with screws.
• Step 10: Reattach the back cover with fresh adhesive.
• Step 11: Power on the device to ensure the new battery is functioning correctly.

3. Replacing the Camera

• Step 1: Turn off the phone and remove any SIM card trays.
• Step 2: Use a heat gun or hairdryer to soften the adhesive around the back cover.
• Step 3: Insert a plastic prying tool to lift the back cover carefully.
• Step 4: Remove the screws securing the protective cover over the camera module.
• Step 5: Disconnect the camera connectors from the motherboard.
• Step 6: Carefully remove the old camera module.
• Step 7: Insert the new camera module and connect it to the motherboard.
• Step 8: Secure the protective cover back onto the phone using screws.
• Step 9: Reattach the back cover with fresh adhesive.
• Step 10: Power on the phone to test the new camera.

By following these detailed instructions, you should be able to replace the essential parts of your Oppo Find X3 Lite 5G successfully. Always make sure to handle all components with care and use the appropriate tools to avoid any damage.