Oppo Find X3 Neo 5G spare parts

Oppo Find X3 Neo 5G Technical Characteristics

The Oppo Find X3 Neo 5G is a sophisticated smartphone featuring high-end specifications to cater to modern needs. Below are its main technical characteristics:

Technical Specifications

• Display: 6.55 inch AMOLED, 2400 x 1080 pixels
• Processor: Qualcomm Snapdragon 865
• RAM: 12 GB
• Internal Storage: 256 GB
• Operating System: ColorOS 11.1 based on Android 11
• Camera:
  • Rear: Quad - 50 MP (wide), 13 MP (telephoto), 16 MP (ultrawide), 2 MP (macro)
  • Front: 32 MP (wide)
• Battery: 4500 mAh, 65W fast charging
• Connectivity: 5G, Wi-Fi 6, Bluetooth 5.2
• Other Features: Under-display fingerprint sensor, NFC, USB Type-C

Instructions for Replacing Oppo Find X3 Neo 5G Parts

Replacing parts in the Oppo Find X3 Neo 5G requires precision and care. Follow the detailed instructions below for a safe and successful replacement process.

Tools Needed

• Plastic opening tools
• Suction handle
• Screwdriver set
• Tweezers
• SIM card ejector tool
• Heat gun or hair dryer
• ESD-safe mat and wrist strap

General Instructions

• Turn off the phone and remove any connected peripherals.
• Remove the SIM card tray using the SIM card ejector tool.
• Use a heat gun or hair dryer to gently heat the edges of the back cover to soften the adhesive.
• Place a suction handle on the back cover and gently lift to create a slight gap.
• Insert a plastic opening tool into the gap and carefully work around the edges to release the adhesive. Avoid using metal tools to prevent damage.
• Once the back cover is removed, disconnect the battery connector to prevent any accidental short circuits.

Replacing the Battery

• Follow the general instructions to remove the back cover.
• Locate the battery connector and gently disconnect it using plastic tweezers.
• Remove the adhesive strips securing the battery by gently pulling on them.
• Lift the battery out of the phone and replace it with a new one, ensuring the adhesive strips are securely attached.
• Reconnect the battery connector and follow the general reassembly steps.

Replacing the Display

• Follow the general instructions to remove the back cover and disconnect the battery.
• Disconnect the display connector which is usually located near the middle of the phone's mainboard.
• Use a heat gun or hair dryer to gently heat the edges of the old display to soften the adhesive.
• Use a plastic opening tool to lift and remove the old display from the front of the device.
• Clean any residual adhesive from the frame before applying new adhesive strips.
• Align and attach the new display, ensuring it is firmly in place.
• Reconnect the display connector and follow the general reassembly steps.

Reassembling the Phone

• Reconnect the battery connector if it was disconnected.
• Carefully align and press the back cover into place, ensuring all clips are secure.
• If necessary, use mild heat to re-adhere the back cover edges.
• Power on the device and test to ensure the new parts are functioning correctly.

By following these instructions, you can replace various components of the Oppo Find X3 Neo 5G efficiently. Ensure to handle all parts and tools with care to avoid damage.