Oppo Find X3 Pro 5G spare parts

Technical Characteristics of Oppo Find X3 Pro 5G Repuestos

Display

The Oppo Find X3 Pro 5G features a 6.7-inch AMOLED display with a resolution of 1440 x 3216 pixels. It offers a 120Hz refresh rate and supports HDR10+.

Battery

The battery for the Oppo Find X3 Pro 5G has a capacity of 4500mAh and supports 65W fast charging, 30W wireless charging, and 10W reverse wireless charging.

Camera

The device sports a quad-camera setup at the rear with the following configurations:

• 50 MP, f/1.8, 26mm (wide), omnidirectional PDAF, OIS
• 13 MP, f/2.4, 52mm (telephoto), 2x optical zoom, PDAF
• 50 MP, f/2.2, 16mm, 110˚ (ultrawide), omnidirectional PDAF
• 3 MP, f/3.0, (microscope), AF, 60x magnification

Front camera: 32 MP, f/2.4, 26mm (wide).

Processor

Powered by Qualcomm SM8350 Snapdragon 888, the Oppo Find X3 Pro 5G is designed to deliver high performance with an octa-core CPU and Adreno 660 GPU.

Storage

Options for internal storage include 256GB with 8GB or 12GB of RAM and 512GB with 12GB of RAM. The device does not support expandable storage.

Other Features

• Operating System: Android 11, upgradable to Android 12, ColorOS 12
• Connectivity: 5G, Wi-Fi 6, Bluetooth 5.2, NFC
• IP68 dust/water resistant

Instructions on How to Replace Oppo Find X3 Pro 5G Repuestos

Necessary Tools and Materials

• Phillips #00 Screwdriver
• Plastic Prying Tools
• Suction Cup
• Tweezers
• Anti-static Wrist Strap
• Replacement Parts (display, battery, camera, etc.)

General Precautions

• Ensure the device is turned off before attempting any repair.
• Discharge the static electricity from your body by using an anti-static wrist strap.
• Handle components with care to avoid damage.

Step-by-Step Replacement Guide

1. Back Cover Removal

Using a suction cup, gently apply it to the back cover of the phone. Carefully use the plastic prying tool to lift and separate the back cover from the frame. Be cautious, as the back cover is held by adhesives and can be fragile.

2. Disconnect the Battery

• Locate and remove all screws securing the protective shields covering the battery connector.
• Use tweezers to carefully remove the shields.
• Disconnect the battery connector from the motherboard using a plastic prying tool.

3. Replace Display

To replace the display:

• Disconnect all connectors associated with the display.
• Use the plastic prying tool to carefully separate the display from the frame. Be cautious of the flex cables.
• Apply new adhesive to the frame where the new display will be placed.
• Attach the new display and reconnect all connectors. Ensure all components are properly seated.

4. Replace Battery

If replacing the battery:

• Gently lift the battery using the plastic prying tool. Be careful not to puncture or bend the battery.
• Install the new battery and reconnect the battery connector.
• Ensure the new battery is properly seated and secured with adhesive if necessary.

5. Replace Camera Module

For camera module replacement:

• Carefully disconnect the camera's flex cables from the motherboard.
• Use tweezers to remove the camera module from its slot.
• Position the new camera module in place.
• Reconnect the flex cables to the motherboard.

6. Reassemble the Phone

• Reconnect any remaining connectors and install the protective shields back in place.
• Screw all the screws back to their respective locations.
• Carefully reattach the back cover using the suction cup and ensure it is securely in place.

Test the device to ensure that all components are working correctly. If any issues arise, recheck connections and assembly steps.