Oppo Find X5 Pro spare parts

Technical Characteristics of Oppo Find X5 Pro Repuestos

The Oppo Find X5 Pro is a high-end smartphone that demands quality replacement parts (repuestos) to maintain its performance and user experience. Here are the technical characteristics of some commonly replaced components:

Screen

• Type: AMOLED
• Size: 6.7 inches
• Resolution: 1440 x 3216 pixels
• Protection: Corning Gorilla Glass Victus
• Features: HDR10+, 120Hz refresh rate

Battery

• Type: Li-Po
• Capacity: 5000 mAh
• Charging: Fast charging 80W, Fast wireless charging 50W, Reverse wireless charging 10W

Cameras

• Main Camera: Triple setup - 50 MP wide, 50 MP ultrawide, 13 MP telephoto
• Front Camera: 32 MP

Processor

• Chipset: Qualcomm SM8450 Snapdragon 8 Gen 1 (4 nm)
• CPU: Octa-core
• GPU: Adreno 730

Storage

• Internal: 256GB/512GB
• RAM: 8GB/12GB

Instructions for Replacing Oppo Find X5 Pro Repuestos

Replacing components in the Oppo Find X5 Pro requires precision and care. Follow these detailed instructions to ensure a successful repair:

Tools Required

• Phillips #00 Screwdriver
• Plastic Opening Tools
• Tweezers
• SIM Card Ejector Tool
• Suction Cup
• Adhesive Strips
• Heat Gun or Hair Dryer

Step-by-Step Guide

1. Power Off the Device

Ensure the Oppo Find X5 Pro is completely powered off before starting the replacement process.

2. Remove the SIM Card Tray

Use the SIM card ejector tool to remove the SIM card tray from the device.

3. Heat the Edges

Use a heat gun or hair dryer to gently heat the edges of the back cover. This will soften the adhesive, making it easier to remove.

4. Remove the Back Cover

Carefully use a suction cup to lift the back cover. Insert a plastic opening tool into the gap to help loosen the adhesive. Work your way around the edges until the back cover is detached.

5. Disconnect the Battery

Locate the battery connector and use a plastic tool to disconnect it from the motherboard. This ensures no power is running through the device during the replacement.

6. Remove Required Components

Depending on the component you are replacing (screen, battery, camera, etc.), unscrew and remove the necessary parts, taking care not to damage any cables or connectors.

7. Install the New Component

Place the new replacement component in the exact location of the old one. Reconnect any cables and screws, ensuring everything is securely in place.

8. Reconnect the Battery

Once the new component is installed, reconnect the battery connector to the motherboard.

9. Reattach the Back Cover

Apply new adhesive strips around the edges of the back cover. Press the back cover onto the device firmly to ensure it is properly sealed.

10. Power On the Device

Turn on the Oppo Find X5 Pro and test the new component to ensure it is functioning correctly.

By following these detailed instructions, you should be able to successfully replace the necessary components of the Oppo Find X5 Pro.