Oppo N1 Mini spare parts

Technical Characteristics of Oppo N1 Mini Repuestos

The Oppo N1 Mini is known for its aesthetic design and reliable performance. To maintain its functionality, it's crucial to use high-quality replacement parts (repuestos). Here are some technical characteristics of the key repuestos commonly used:

Display Assembly

• Size: 5.0 inches
• Resolution: 720 x 1280 pixels
• Type: IPS LCD capacitive touchscreen, 16M colors

Battery

• Type: Li-Ion 2140 mAh battery

Camera Module

• Primary Camera: 13 MP, autofocus, LED flash
• Video: 1080p@30fps

Rear Cover

• Material: High-quality plastic

Instructions on How to Replace Oppo N1 Mini Repuestos

Follow these detailed instructions to replace the key components of the Oppo N1 Mini:

1. Replacement of Display Assembly

• Power off the Oppo N1 Mini and remove the SIM card tray.
• Use a plastic spudger to carefully pry open the back cover starting from the edges.
• Remove the screws securing the midframe using a Phillips screwdriver.
• Disconnect the battery connector carefully using a plastic prying tool.
• Disconnect the display connector and remove the old display assembly.
• Attach the new display assembly by connecting it to the mainboard.
• Reconnect all disconnected components and secure the midframe with screws.
• Reattach the back cover and power on the device to test the new display.

2. Replacement of Battery

• Power off the device and open the back cover following the steps mentioned earlier.
• Remove the screws securing the midframe and disconnect the battery connector.
• Carefully remove the adhesive strips holding the battery in place.
• Lift the old battery out using a plastic tool.
• Install the new battery and connect it to the connector.
• Secure the midframe with the screws and reattach the back cover.
• Power on the device to ensure the new battery is functioning correctly.

3. Replacement of Camera Module

• Power off the Oppo N1 Mini and open the back cover as instructed above.
• Use a screwdriver to remove the screws securing the midframe and camera module.
• Disconnect the camera module connector using a plastic prying tool.
• Carefully remove the old camera module from its slot.
• Install the new camera module by connecting it to the mainboard.
• Secure the new camera module and midframe with screws.
• Reattach the back cover and power on the device to test the new camera module.

4. Replacement of Rear Cover

• Power off the device and remove the old rear cover using a plastic spudger.
• Align the new rear cover with the device.
• Press down firmly along the edges to ensure it clicks into place securely.
• Power on the device to confirm the rear cover is properly attached.