Oppo N1 spare parts

Technical Characteristics of Oppo N1 Repuestos

The Oppo N1 is a high-performance smartphone known for its innovative design and robust hardware. Below are the technical characteristics of some of its most commonly replaced components:

1. Display Assembly

• Screen Size: 5.9 inches
• Resolution: 1080 x 1920 pixels
• Type: IPS LCD capacitive touchscreen
• Protection: Corning Gorilla Glass 3

2. Battery

• Capacity: 3610 mAh
• Type: Li-Ion non-removable

3. Rear Camera

• Resolution: 13 MP
• Features: Rotating lens, autofocus, dual-LED flash

4. Other Components

• Charging Port: Micro USB
• Headphone Jack: 3.5mm audio jack
• Buttons: Volume rockers, power button
• SIM Tray: Single SIM (Micro-SIM)

Instructions for Replacing Oppo N1 Repuestos

Important Notes

Before performing any repairs, ensure that your phone is powered off and disconnected from any power source. Use appropriate tools and proceed with caution to avoid damaging any internal components.

1. Replacing the Display Assembly

• Use a SIM ejector tool to remove the SIM card tray.
• Remove the screws at the bottom of the phone using a T2 Torx screwdriver.
• Use a plastic opening tool to gently pry open the back cover. Start from the bottom and work your way around the edges.
• Disconnect the battery connector carefully using a spudger tool.
• Disconnect the display cable by carefully prying the connector off the socket on the motherboard.
• Remove the screws securing the display assembly to the frame and gently lift the display assembly off the frame.
• Align the new display assembly with the frame and secure it with screws.
• Reconnect the display cable and then the battery connector.
• Place the back cover back on and press around the edges to snap into place.
• Insert the screws at the bottom of the phone and place the SIM card tray back into its slot.

2. Replacing the Battery

• Follow the initial steps to open the back cover and disconnect the battery connector.
• Remove the screws securing the battery to the frame using a T2 Torx screwdriver.
• Gently lift and remove the old battery using a plastic pry tool, avoiding sharp objects that could puncture the battery.
• Align and place the new battery into the compartment and secure it with screws.
• Reconnect the battery connector and ensure it is firmly seated.
• Replace the back cover and reinsert the screws at the bottom of the phone.

3. Replacing the Rear Camera

• Open the back cover using the steps mentioned earlier.
• Locate and disconnect the rear camera connector from the motherboard using a spudger tool.
• Remove the screws securing the camera module and gently lift it out of its socket.
• Place the new camera module into the socket and secure it with screws.
• Reconnect the camera connector and ensure it is firmly attached to the motherboard.
• Close the back cover and reinsert the screws at the bottom of the phone.

4. Replacing the Charging Port

• Open the back cover and disconnect the battery connector as previously described.
• Locate the charging port module at the bottom of the phone and disconnect its ribbon cable.
• Remove the screws securing the charging port module to the frame using a T2 Torx screwdriver.
• Gently lift the charging port module out of its compartment using a plastic pry tool.
• Align and place the new charging port module into the compartment and secure it with screws.
• Reconnect the ribbon cable to the motherboard.
• Reconnect the battery connector and close the back cover.
• Insert the screws at the bottom of the phone.

Conclusion

Performing repairs on your Oppo N1 can be done with patience and attention to detail. Always use high-quality replacement parts and tools designed for smartphone repair to ensure the longevity and performance of your device.