Oppo R5 spare parts

Oppo R5 Replacement Parts and Technical Specifications

Technical Characteristics

• Display: 5.2 inches AMOLED, 1080 x 1920 pixels
• Processor: Qualcomm Snapdragon 615, Octa-core
• RAM: 2 GB
• Storage: 16 GB internal, no external slot
• Camera: Rear 13 MP, Front 5 MP
• Battery: Non-removable Li-Po 2000 mAh
• Operating System: Android 4.4.4 (KitKat), upgradable to Android 5.1 (Lollipop)

Instructions for Replacing Oppo R5 Parts

Tools Needed

• Small Phillips screwdriver
• Plastic separation tools
• Suction handle
• Small tweezers
• Adhesive tape
• Heat gun or hairdryer

Step-by-Step Instructions

1. Opening the Phone

• Power off the phone completely.
• Use the SIM card ejection tool to remove the SIM card tray.
• Utilize a heat gun or hairdryer to gently heat the edges of the back cover to soften the adhesive.
• Apply the suction handle on the back cover and carefully lift to create a small gap.
• Insert a plastic separation tool into the gap and work your way around the edges to completely remove the back cover. Be patient to avoid damaging the phone.

2. Disconnecting the Battery

• Locate the battery connector and use the small Phillips screwdriver to remove the screws securing the metal bracket over the connector.
• Carefully lift the metal bracket using the tweezers.
• Disconnect the battery connector by gently prying it up with a plastic separation tool.

3. Replacing the Screen

• Remove the screws securing the display assembly to the frame.
• Use a plastic separation tool to gently lift the display from the frame. Apply consistent pressure but avoid using excessive force.
• If necessary, use the heat gun or hairdryer to heat the edges of the screen to weaken the adhesive.
• Disconnect the display cable from the mainboard connector.
• Connect the new display cable to the mainboard connector and place it properly on the frame.
• Secure the new display with the screws you previously removed.

4. Reassembling the Phone

• Reconnect the battery connector and secure it with the metal bracket and screws.
• Carefully place the back cover on the phone, ensuring it aligns perfectly with the frame.
• Gently press around the edges of the back cover to ensure it adheres properly.
• Reinsert the SIM card tray.
• Power on the phone to confirm that the new parts are functioning correctly.