Oppo R819 spare parts

Technical Characteristics of Oppo R819 Replacement Parts (Repuestos)

The Oppo R819 is a smartphone known for its sleek design and reliable performance. When it comes to replacement parts, it is essential to use high-quality repuestos to maintain the device's efficiency. Below are the key replacement parts and their technical characteristics:

1. Screen (LCD and Digitizer)

• Type: IPS LCD capacitive touchscreen
• Size: 4.7 inches
• Resolution: 720 x 1280 pixels
• Protection: Corning Gorilla Glass 2

2. Battery

• Type: Lithium-Ion (Li-Ion)
• Capacity: 2000 mAh

3. Charging Port

• Type: Micro USB 2.0
• Compatibility: Supports USB On-The-Go

4. Camera

• Rear Camera: 8 MP, F/2.0, autofocus, LED flash
• Front Camera: 2 MP, F/2.8

5. Back Cover

• Material: Plastic
• Finish: Matte

Instructions to Replace Oppo R819 Repuestos

Replacing parts on your Oppo R819 can extend its life and improve performance. Here are detailed instructions for replacing some of the main repuestos:

1. Replacing the Screen (LCD and Digitizer)

• Power off your Oppo R819 completely.
• Use a SIM ejector tool to remove the SIM card tray.
• Remove the back cover by gently prying it off using a plastic opening tool.
• Unscrew the screws securing the mid-frame using a precision screwdriver.
• Carefully detach the mid-frame and disconnect the battery connector.
• Disconnect the screen connectors from the motherboard.
• Gently heat the edges of the screen using a heat gun to soften the adhesive.
• Use a plastic pry tool to carefully lift the old screen from the device.
• Apply adhesive tape or glue to the new screen and place it on the device.
• Reconnect the screen connectors and secure the mid-frame back with screws.
• Reattach the battery connector and put the back cover and SIM tray back in place.

2. Replacing the Battery

• Power off your Oppo R819.
• Remove the SIM card tray and the back cover.
• Unscrew the screws holding the mid-frame using a precision screwdriver.
• Detach the mid-frame and disconnect the battery connector.
• Use a plastic pry tool to carefully lift the battery from its compartment.
• Insert the new battery into the compartment and connect the battery connector.
• Reattach the mid-frame and secure it with screws.
• Attach the back cover and the SIM card tray.

3. Replacing the Charging Port

• Power off your Oppo R819.
• Remove the SIM card tray, back cover, and mid-frame as described in the screen replacement instructions.
• Locate the charging port assembly and disconnect its ribbon cable from the motherboard.
• Remove any screws or adhesive securing the charging port to the frame.
• Gently lift the old charging port from the device.
• Place the new charging port in position and secure it with screws or adhesive.
• Reconnect the ribbon cable to the motherboard.
• Reattach the mid-frame, back cover, and SIM card tray.

4. Replacing the Camera

• Power off your Oppo R819.
• Remove the SIM card tray and the back cover.
• Unscrew the screws and detach the mid-frame as mentioned in previous instructions.
• Locate the camera module and disconnect its ribbon cable from the motherboard.
• Remove any screws or adhesive holding the camera module in place.
• Gently lift the old camera module from the device.
• Place the new camera module and secure it with screws or adhesive.
• Reconnect the ribbon cable to the motherboard.
• Reattach the mid-frame, back cover, and SIM card tray.