Oppo R9 spare parts

Technical Characteristics of Oppo R9 Repuestos

The Oppo R9 is a popular smartphone that offers a sleek design and impressive performance. To keep this device functioning at its best, it may be necessary to replace certain parts (repuestos) over time. Below are the technical characteristics of common replacement parts:

• Screen Assembly: 5.5 inches, AMOLED, Full HD (1920x1080 pixels), multitouch capabilities.
• Battery: Lithium-ion, 2850mAh capacity, non-removable, supports VOOC Flash Charge technology.
• Rear Camera: 13 MP, f/2.2 aperture, phase detection autofocus, LED flash.
• Front Camera: 16 MP, f/2.0 aperture, 1080p video recording.
• Motherboard: Equipped with an Octa-core processor, 4GB RAM, 64GB internal storage expandable via microSD up to 128GB.
• SIM Tray: Dual SIM (Nano-SIM, dual stand-by), supports 4G LTE.

Instructions for Replacing Oppo R9 Repuestos

Step 1: Power Off and Remove SIM Tray

Ensure the device is powered off to prevent any electrical damage:

• Press and hold the power button until the power menu appears.
• Select 'Power off' and confirm.
• Use a SIM ejector tool to remove the SIM card tray from the side of the device.

Step 2: Remove the Back Cover

You will need a plastic opening tool and a Phillips head screwdriver for this step:

• Locate the screws at the bottom of the device near the charging port and remove them.
• Use the plastic opening tool to gently pry open the back cover, starting from the bottom edge and working your way around the device.
• Carefully lift off the back cover without damaging the internal components.

Step 3: Disconnect the Battery

To safely replace any internal components, the battery must be disconnected:

• Locate the battery connector on the motherboard.
• Use a plastic tool to gently pry up and disconnect the battery connector.

Step 4: Replace the Desired Component

Based on the component you are replacing, follow the respective instructions:

• Screen Assembly: Remove any screws securing the old screen, disconnect the display connectors, and carefully replace it with the new screen assembly.
• Battery: Gently lift the old battery using the pull tab and replace it with the new battery, ensuring it fits properly and reconnect the battery connector.
• Camera Modules: Unscrew and disconnect the old camera module(s), then attach and secure the new module(s) in place.
• Motherboard: Remove all screws and connectors attached to the old motherboard, swap it with the new motherboard, and reconnect all components and screws.

Step 5: Reassemble the Device

Follow these steps to put your device back together:

• Carefully align and attach the back cover to the device frame.
• Secure the back cover by replacing the screws at the bottom of the device.
• Reinsert the SIM card tray.
• Power on the device to ensure everything is functioning correctly.

Important Safety Information

Always handle electronic components with care and avoid static discharge. If you are not confident in performing these replacements yourself, seek professional assistance to avoid damaging your device.