Oppo Reno 10 5G CPH2531 spare parts

Technical Characteristics of Oppo Reno 10 5G Repuestos

The Oppo Reno 10 5G is a highly sophisticated smartphone featuring advanced technological components. Below are some of the main technical characteristics of its key replacement parts (repuestos):

Screen

• Type: AMOLED
• Size: 6.4 inches
• Resolution: 1080 x 2400 pixels
• Protection: Corning Gorilla Glass 5

Battery

• Type: Li-Po
• Capacity: 4300 mAh
• Fast Charging: Yes, 65W SuperVOOC 2.0

Camera

• Main Camera: Quad (64 MP, 13 MP, 8 MP, 2 MP)
• Front Camera: 32 MP

Other Components

• Processor: Qualcomm Snapdragon 765G
• RAM: 8 GB
• Storage: 128 GB / 256 GB

Instructions on How to Replace Oppo Reno 10 5G Repuestos

General Tools Needed

• Phillips-head screwdriver
• Plastic opening tools
• SIM card ejector tool
• Tweezers
• Adhesive strips
• Heat gun or hairdryer

Step-by-Step Instructions for Replacing the Screen

Follow these steps to replace the screen on your Oppo Reno 10 5G:

• Step 1: Power off the device completely.
• Step 2: Use the SIM card ejector tool to remove the SIM card tray.
• Step 3: Apply heat around the edges of the screen to loosen the adhesive. Use a heat gun or hairdryer.
• Step 4: Use a plastic opening tool to gently lift and separate the screen from the rest of the phone.
• Step 5: Disconnect the screen's ribbon cable using tweezers. Be delicate to avoid damage.
• Step 6: Connect the new screen's ribbon cable and carefully align it with the phone body.
• Step 7: Press the new screen firmly into place and make sure it is secure.
• Step 8: Power on the device to test the new screen's functionality.

Step-by-Step Instructions for Replacing the Battery

Follow these steps to replace the battery on your Oppo Reno 10 5G:

• Step 1: Power off the device completely.
• Step 2: Use the SIM card ejector to remove the SIM card tray.
• Step 3: Remove the back cover of the phone by applying heat and gently prying it off with a plastic opening tool.
• Step 4: Unscrew the screws securing the battery cover using a Phillips-head screwdriver.
• Step 5: Disconnect the battery connector using tweezers.
• Step 6: Carefully lift and remove the battery. If it is glued down, use the plastic opening tool to help separate it from the adhesive.
• Step 7: Place the new battery into the compartment and reconnect the battery connector.
• Step 8: Screw the battery cover back into place and reattach the back cover.
• Step 9: Power on the device to ensure the new battery works properly.

Always remember to work in a clean, static-free environment and handle all parts with care to avoid damaging your device.