Oppo Reno 10X Zoom spare parts

Oppo Reno 10X Zoom Replacement Parts Technical Characteristics

Here are the detailed technical characteristics of replacement parts for the Oppo Reno 10X Zoom:

• Display: 6.6 inches, AMOLED, 1080 x 2340 pixels
• Battery: Non-removable Li-Po 4065 mAh
• Front Camera: Motorized pop-up 16 MP
• Rear Camera: Triple - 48 MP (wide), 13 MP (periscope telephoto), 8 MP (ultrawide)
• Processor: Qualcomm Snapdragon 855
• Memory: 6GB/8GB RAM, 128GB/256GB storage
• Operating System: Android 9.0 (Pie), upgradable to Android 10, ColorOS 7

Instructions on How to Replace Oppo Reno 10X Zoom Replacement Parts

1. Preliminary Steps

• Power off the device to avoid any electric hazards.
• Remove the SIM card tray using a SIM eject tool.
• Ensure you have the necessary tools: a small Phillips screwdriver, plastic pry tools, tweezers, and a heat gun.

2. Back Cover Removal

• Use a heat gun to gently heat the edges of the back cover to soften the adhesive.
• Carefully insert a plastic pry tool between the back cover and the frame.
• Work your way around the edges to release the adhesive and remove the back cover.
• Be cautious with the fingerprint sensor cable if attached.

3. Battery Replacement

• Disconnect the battery connector carefully.
• Remove the screws securing the battery module.
• Gently pry up the battery using a plastic tool. Do not use metal tools to avoid puncturing the battery.
• Insert the new battery and screw it back in place.
• Reconnect the battery connector.

4. Display Screen Replacement

• Disconnect the display connector from the motherboard.
• Use a heat gun to gently heat the edges of the display screen to soften the adhesive.
• Insert a plastic pry tool between the display and the frame to release the adhesive.
• Attach the new display and press it firmly to secure the adhesive.
• Reconnect the display connector to the motherboard.

5. Reassembling

• Ensure all connectors are properly reattached to the motherboard.
• Carefully align and press the back cover into place.
• Insert the SIM card tray back into its slot.
• Power on the device to verify that all components are functioning correctly.