Oppo Reno 5 4G spare parts

Technical Characteristics of Oppo Reno 5 4G Repuestos

The Oppo Reno 5 4G is a feature-packed smartphone that requires high-quality repuestos (spare parts) to maintain its performance and aesthetics. Here are the technical characteristics of commonly replaced repuestos for the Oppo Reno 5 4G:

1. Screen (Display) Assembly

• Type: AMOLED capacitive touchscreen
• Size: 6.43 inches
• Resolution: 1080 x 2400 pixels
• Protection: Corning Gorilla Glass 3

2. Battery

• Capacity: 4310 mAh
• Type: Li-Po, non-removable
• Fast Charging: 50W

3. Camera Module

• Main Camera: Quad: 64 MP (wide), 8 MP (ultrawide), 2 MP (macro), 2 MP (depth)
• Selfie Camera: 44 MP (wide)

4. Back Cover

• Material: Plastic or Glass
• Colors: Various options available

5. Charging Port

• Type: USB Type-C

Instructions for Replacing Oppo Reno 5 4G Repuestos

Replacing parts in the Oppo Reno 5 4G requires precision and care. Below are detailed instructions on how to replace these key components:

Step-by-Step Instructions:

1. Screen (Display) Assembly Replacement

• Power off the device.
• Remove the SIM card tray using the ejection tool.
• Use a heat gun or hair dryer to soften the adhesive around the edges of the back cover.
• Carefully use a suction cup and pry tool to lift and remove the back cover.
• Unscrew the screws securing the mid-frame and carefully detach it to access the internals.
• Disconnect the battery connector to avoid any short circuits.
• Disconnect the display connector from the motherboard.
• Use a heat gun or hair dryer to soften the adhesive holding the display in place.
• Gently pry off the old display using a plastic tool and remove it completely.
• Clean the adhesive residues from the frame of the phone.
• Apply new adhesive to the edges of the new display assembly.
• Connect the new display connector to the motherboard.
• Reattach the mid-frame and secure it with screws.
• Reattach the back cover using mild adhesive or the remaining adhesive.
• Power on the device to test the new display.

2. Battery Replacement

• Power off the device.
• Remove the back cover as described in the screen replacement section.
• Unscrew the screws securing the battery connector cover and remove it.
• Disconnect the battery connector from the motherboard.
• Use a plastic tool to gently pry the old battery from its adhesive. Be cautious not to puncture the battery.
• Remove any remaining adhesive from the battery compartment.
• Place the new adhesive strips in the battery compartment.
• Insert the new battery and press it firmly to ensure it's properly seated.
• Reconnect the battery connector to the motherboard.
• Replace the battery connector cover and secure it with screws.
• Reattach the back cover using mild adhesive.
• Power on the device to ensure the new battery is functioning correctly.

3. Camera Module Replacement

• Power off the device.
• Remove the back cover as described previously.
• Unscrew the screws securing the camera module cover and remove it.
• Disconnect the camera module connectors from the motherboard.
• Carefully remove the old camera module.
• Place the new camera module in the proper position.
• Reconnect the camera module connectors to the motherboard.
• Replace the camera module cover and secure it with screws.
• Reattach the back cover using mild adhesive.
• Power on the device to test the new camera module.

4. Back Cover Replacement

• Power off the device.
• Use a heat gun or hair dryer to soften the adhesive around the edges of the back cover.
• Carefully use a suction cup and pry tool to lift and remove the back cover.
• Align the new back cover with the device body.
• Press firmly around the edges to secure the new back cover with the adhesive.
• Power on the device to ensure everything is functioning properly.