Oppo Reno 6 5G spare parts

Technical Characteristics of Oppo Reno 6 5G Repuestos

Battery

Type: Lithium Polymer

Capacity: 4300mAh

Voltage: 3.85V

Display

Type: AMOLED

Size: 6.43 inches

Resolution: 1080 x 2400 pixels

Protection: Corning Gorilla Glass 5

Camera Module

Primary Camera: 64 MP, f/1.7, 26mm (wide), PDAF

Secondary Camera: 8 MP, f/2.2, 119˚ (ultrawide)

Additional Camera: 2 MP, f/2.4, (macro)

Replacement Instructions for Oppo Reno 6 5G Repuestos

Step 1: Gather Necessary Tools

• Phillips head screwdriver
• Plastic pry tools
• Suction cup
• SIM ejector tool
• Anti-static mat and wrist strap
• Replacement parts (battery, display, or camera module)

Step 2: Power Down the Device

Ensure the phone is fully powered off before beginning any repairs.

Step 3: Eject the SIM Tray

Use the SIM ejector tool to remove the SIM tray from the side of the phone.

Step 4: Remove the Back Cover

• Use a suction cup to create a gap between the back cover and the frame.
• Insert a plastic pry tool into the gap to gently pry open the back cover.
• Carefully work your way around the edges to release the clips securing the back cover.

Step 5: Disconnect the Battery

• Locate the battery connector on the motherboard.
• Use a plastic pry tool to gently disconnect the battery ribbon cable from its socket.

Step 6: Remove the Battery (If Replacing)

• Use the pull tab to carefully lift the battery out of the adhesive.
• If the adhesive is strong, use a bit of isopropyl alcohol to loosen it.

Step 7: Replace the Display (If Replacing)

• Disconnect the display connector from the motherboard.
• Use a heat gun or hairdryer to warm the edges of the display, softening the adhesive.
• Use a plastic pry tool to carefully separate the display from the frame.
• Install the new display by carefully aligning it and pressing it into place.

Step 8: Replace the Camera Module (If Replacing)

• Disconnect the camera connectors from the motherboard.
• Remove any screws securing the camera module in place.
• Carefully lift the camera module from the phone.
• Install the new camera module by aligning it and securing it with screws.

Step 9: Reassemble the Phone

• Reconnect the battery ribbon cable to the motherboard.
• Snap the back cover into place, ensuring all clips are secured.
• Reinsert the SIM tray.

Step 10: Power On the Device

Once fully reassembled, power on the device to ensure all functions are working correctly.

Note: Proceed with caution during the repair process. If unsure, it's recommended to consult a professional technician.