Oppo Reno 6 Pro 5G spare parts

Technical Characteristics of Oppo Reno 6 Pro 5G Repuestos

The Oppo Reno 6 Pro 5G is a high-end smartphone equipped with various important repuestos (spare parts) that might need replacement over time. Below are detailed technical characteristics of essential Oppo Reno 6 Pro 5G repuestos:

Screen

Type: AMOLED

Size: 6.55 inches

Resolution: 1080 x 2400 pixels

Protection: Corning Gorilla Glass 5

Battery

Type: Li-Po

Capacity: 4500 mAh

Charging: Fast charging 65W, 100% in 31 min (advertised)

Camera Module

• Rear Camera: 50 MP (wide), 13 MP (telephoto), 16 MP (ultrawide), 2 MP (macro)
• Front Camera: 32 MP

Other Important Parts

• USB Type-C Port
• SIM Card Tray
• Earpiece and Loudspeaker
• Volume and Power Buttons

Instructions on How to Replace Oppo Reno 6 Pro 5G Repuestos

Replacing parts on your Oppo Reno 6 Pro 5G requires care and precision. Below are detailed instructions for replacing common repuestos:

1. Screen Replacement

• Step 1: Power off your phone.
• Step 2: Remove the SIM card tray using the provided tool or a paperclip.
• Step 3: Apply heat around the edges of the screen using a heat gun or a hairdryer to loosen the adhesive.
• Step 4: Use a suction cup to gently lift the screen while using a plastic prying tool to carefully separate the screen from the body.
• Step 5: Disconnect the screen from the motherboard by carefully lifting the connectors.
• Step 6: Remove the old screen and replace it with the new one by reconnecting the connectors.
• Step 7: Gently press the new screen into place and ensure it's properly aligned.
• Step 8: Reinsert the SIM card tray and power on the phone to test the new screen.

2. Battery Replacement

• Step 1: Power off your phone.
• Step 2: Remove the back cover by applying heat and using a plastic prying tool.
• Step 3: Unscrew the screws securing the battery connector bracket, then remove the bracket.
• Step 4: Disconnect the battery connector from the motherboard.
• Step 5: Gently lift the battery using a plastic prying tool. Be cautious not to bend or puncture the battery.
• Step 6: Replace it with the new battery and reconnect the battery connector.
• Step 7: Secure the connector bracket back in place with screws.
• Step 8: Replace the back cover and power on the phone to verify the new battery works correctly.

3. Camera Module Replacement

• Step 1: Power off your phone.
• Step 2: Remove the back cover using heat and a plastic prying tool.
• Step 3: Unscrew the screws securing the camera module bracket.
• Step 4: Disconnect the camera module connectors from the motherboard.
• Step 5: Carefully lift out the old camera module and replace it with the new one.
• Step 6: Reconnect the camera module connectors and secure the bracket back in place.
• Step 7: Replace the back cover and power on the phone to test the new camera module.

Always ensure to follow these instructions with care and patience. If you are not confident in performing these replacements, consider seeking professional assistance.