Oppo Reno 7 4G CPH2363 spare parts

Oppo Reno 7 4G CPH2363 Repuestos Technical Characteristics

Below are the primary technical characteristics of the Oppo Reno 7 4G CPH2363 repuestos (parts).

• Display: 6.43-inch AMOLED, 1080 x 2400 pixels
• Processor: Qualcomm Snapdragon 680
• RAM: 8GB
• Storage: 128GB (expandable via microSD card)
• Battery: 4500mAh with fast charging
• Rear Camera: 64MP (wide), 8MP (ultrawide), 2MP (macro), 2MP (depth)
• Front Camera: 32MP
• Operating System: ColorOS 11.1 based on Android 11

Instructions for Replacing Oppo Reno 7 4G CPH2363 Repuestos

Required Tools

• Plastic Pry Tools
• Phillips #00 Screwdriver
• Tweezers
• SIM Card Ejector Tool
• Adhesive Tape
• Suction Cup
• Heat Gun or Hair Dryer

Step-by-Step Replacement Instructions

Follow these steps carefully to replace parts of the Oppo Reno 7 4G CPH2363:

Step 1: Power Off the Device

Ensure your Oppo Reno 7 4G is powered off to prevent any damage or injury while performing the replacement.

Step 2: Remove the SIM Card Tray

Use the SIM card ejector tool to remove the SIM card tray from the side of the device.

Step 3: Heat the Back Cover

Using a heat gun or hair dryer, gently heat the edges of the back cover to soften the adhesive. Do not overheat as it may damage the device.

Step 4: Lift the Back Cover

Use a suction cup to gently lift the back cover at the edges. Insert a plastic pry tool into the gap and carefully work your way around to release the adhesive.

Step 5: Disconnect the Battery

• Remove any screws securing the battery connector cover using a Phillips #00 screwdriver.
• Gently lift and remove the cover.
• Use tweezers to disconnect the battery connector from the motherboard.

Step 6: Replace the Desired Component

• Identify the component you need to replace (e.g., display, camera, battery).
• Carefully remove any screws or connectors holding the component in place.
• Replace the component with the new one, ensuring all connectors and screws are securely fastened.

Step 7: Reconnect the Battery and Reassemble

Reconnect the battery connector to the motherboard. Replace the battery connector cover and secure it with screws. Carefully align the back cover and press it firmly around the edges to secure the adhesive. If needed, apply new adhesive tape to ensure a tight seal.

Step 8: Power On and Test

Insert the SIM card tray back into the device. Power on the Oppo Reno 7 4G and test the functionality of the replaced component to ensure everything is working correctly.

These detailed instructions should help you successfully replace repuestos on your Oppo Reno 7 4G CPH2363. If unsure, consult a professional technician.