Oppo Reno 7 5G spare parts

Technical Characteristics of Oppo Reno 7 5G Repuestos

The Oppo Reno 7 5G is a powerful smartphone with several replaceable components, each with distinct technical characteristics. Here are the main parts (repuestos) that you might need to replace:

1. Display Screen

• Size: 6.43 inches
• Resolution: 1080 x 2400 pixels
• Type: AMOLED, 90Hz, HDR10+

2. Battery

• Type: Li-Po
• Capacity: 4500 mAh
• Charging: Fast charging 65W

3. Cameras

• Main Camera: 64 MP (Wide), 8 MP (Ultrawide), 2 MP (Macro)
• Selfie Camera: 32 MP (Wide)

4. Charging Port

• Type: USB Type-C

Instructions for Replacing Oppo Reno 7 5G Repuestos

Replacing parts on the Oppo Reno 7 5G requires precision and care. Below are detailed instructions for replacing the main components:

1. Replacing the Display Screen

Follow these steps to replace the display screen:

• Power off the phone and remove the SIM card tray.
• Use a heat gun to gently warm the edges of the back cover to soften the adhesive.
• Use a suction cup and a plastic pry tool to carefully lift and remove the back cover.
• Remove the screws securing the metal shield and disconnect the battery connector.
• Disconnect the display cable connector.
• Use the heat gun again to soften the adhesive around the old display screen.
• Carefully remove the old display screen using a plastic pry tool.
• Clean the residue adhesive and apply new adhesive tape to the edges of the frame.
• Connect the new display's cable and align it properly in the frame.
• Reassemble the phone by reversing the disassembly steps.
• Power on the phone and test the new display.

2. Replacing the Battery

Follow these steps to replace the battery:

• Power off the phone and remove the SIM card tray.
• Use a heat gun to gently warm the edges of the back cover to soften the adhesive.
• Use a suction cup and a plastic pry tool to carefully lift and remove the back cover.
• Remove the screws securing the metal shield and disconnect the battery connector.
• Gently lift and remove the battery using a plastic pry tool. Be careful not to puncture it.
• Align the new battery in the compartment and press it gently into place.
• Reconnect the battery connector and reassemble the phone by reversing the disassembly steps.
• Power on the phone and test the new battery to ensure proper functioning.

3. Replacing the Camera Modules

Follow these steps to replace the camera modules:

• Power off the phone and remove the SIM card tray.
• Use a heat gun to gently warm the edges of the back cover to soften the adhesive.
• Use a suction cup and a plastic pry tool to carefully lift and remove the back cover.
• Remove the screws securing the metal shield covering the camera modules.
• Disconnect the camera connectors from the motherboard.
• Carefully remove the camera modules using a plastic pry tool.
• Align and connect the new camera modules to the motherboard.
• Secure the metal shield back in place and reassemble the phone.
• Power on the phone and test the new camera modules for proper functionality.

4. Replacing the Charging Port

Follow these steps to replace the charging port:

• Power off the phone and remove the SIM card tray.
• Use a heat gun to gently warm the edges of the back cover to soften the adhesive.
• Use a suction cup and a plastic pry tool to carefully lift and remove the back cover.
• Remove the screws securing the metal shield and disconnect the battery connector.
• Locate the charging port at the bottom of the phone and disconnect its connector from the motherboard.
• Remove the screws securing the charging port assembly.
• Carefully lift and remove the old charging port from the phone.
• Align and install the new charging port into the frame and secure it with screws.
• Reconnect the charging port connector to the motherboard and reassemble the phone.
• Power on the phone and test the new charging port to ensure proper functionality.