Oppo Reno 7 Lite 5G CPH2343 spare parts

Technical Characteristics of Oppo Reno 7 Lite 5G CPH2342 Repuestos

The Oppo Reno 7 Lite 5G CPH2342 is a sophisticated smartphone with features designed to provide an exceptional user experience. Repuestos (spares or replacement parts) for this device are essential for maintaining its performance and extending its longevity. Here are some of the key technical characteristics of the available repuestos for the Oppo Reno 7 Lite 5G CPH2342:

• Display: 6.43 inches AMOLED, 2400 x 1080 pixels resolution
• Battery: Li-Po 4500 mAh, non-removable
• Processor: Qualcomm SM6375 Snapdragon 695 5G (6 nm)
• Camera Module: Dual rear camera (64 MP + 2 MP) and 16 MP front camera
• Connectivity: 5G, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.1, USB Type-C 2.0
• Operating System: Android 11, ColorOS 11.1

Instructions on How to Replace Oppo Reno 7 Lite 5G CPH2342 Repuestos

Replacing components of the Oppo Reno 7 Lite 5G CPH2342 requires careful attention to detail and the right tools. Below, you will find a detailed guide to safely and effectively replace essential parts of this smartphone.

Tools Required:

• Small Phillips screwdriver
• Plastic opening tools
• SIM ejector tool
• Tweezers
• Adhesive strips
• Heat gun (optional, for loosening adhesive)

Step-by-Step Instructions:

1. Back Cover Removal:

• Power off the device and remove the SIM card tray using the SIM ejector tool.
• Apply heat around the edges of the back cover to soften the adhesive, gently using a heat gun if necessary.
• Carefully insert a plastic opening tool into the gap between the back cover and the frame.
• Gently slide the tool around the edges to detach the adhesive and remove the back cover.

2. Disassembly:

• Remove the screws securing the internal protective cover using a small Phillips screwdriver.
• Carefully lift off the protective cover to reveal the internal components.

3. Battery Replacement:

• Disconnect the battery connector from the motherboard using tweezers.
• Carefully lift the battery out of its compartment, taking care not to puncture it.
• Place the new battery into the compartment and reconnect the battery connector.

4. Display Replacement:

• Disconnect the display connector from the motherboard.
• Apply heat along the edges of the screen to loosen the adhesive.
• Use a plastic opening tool to gently lift the display assembly away from the frame.
• Carefully install the new display by aligning it properly and pressing firmly to adhere.
• Reconnect the display connector to the motherboard.

Reassembly:

• Replace the internal protective cover and secure it with screws.
• Realign the back cover and press firmly around the edges to secure the adhesive.
• Reinsert the SIM card tray.
• Power on the device to ensure that all components are functioning correctly.

By following these detailed instructions, you can replace the necessary parts of your Oppo Reno 7 Lite 5G CPH2342 and keep it running smoothly. Always handle the device and its components with care to avoid damage.