Oppo Reno 8 5G spare parts

Oppo Reno 8 5G Repuestos - Technical Characteristics

Here are the technical characteristics of the various spare parts (repuestos) available for the Oppo Reno 8 5G:

1. Screen Replacement

• Type: AMOLED, 120Hz, HDR10+
• Size: 6.43 inches, 99.8 cm2 (~85.3% screen-to-body ratio)
• Resolution: 1080 x 2400 pixels, 20:9 ratio (~409 ppi density)
• Protection: Corning Gorilla Glass 5

2. Battery Replacement

• Type: Li-Po 4500 mAh, non-removable
• Charging: Fast charging 65W, 100% in 28 min (advertised)

3. Camera Module Replacement

• Rear Camera: Triple - 64 MP, f/1.7, 26mm (wide), 8 MP, f/2.2, 119˚ (ultrawide), 2 MP, f/2.4, (macro)
• Front Camera: 32 MP, f/2.4, 26mm (wide)

Instructions to Replace Oppo Reno 8 5G Repuestos

Please follow these detailed instructions to replace the repuestos (spare parts) of the Oppo Reno 8 5G:

Tools Required:

• Plastic Pry Tools
• Suction Cup
• Phillips #00 Screwdriver
• Sim Card Ejector
• ESD-Safe Tweezers
• Spudger

1. Screen Replacement

• Power off the Oppo Reno 8 5G.
• Use the Sim Card Ejector to remove the SIM tray.
• Apply a suction cup to the lower end of the screen to lift it slightly.
• Insert a plastic pry tool into the gap and gently work your way around the device to loosen the adhesive.
• Lift the screen but do not separate it entirely yet.
• Using the Phillips #00 screwdriver, remove all screws securing the shield plates on the display connectors.
• Disconnect the display cable using ESD-safe tweezers.
• Remove the old screen and replace it with the new screen.
• Reconnect the display cable and secure the shield plates with screws.
• Gently press the new screen into place to ensure a proper fit.
• Reinsert the SIM tray and power on the device to test the new screen.

2. Battery Replacement

• Power off the Oppo Reno 8 5G and remove the back cover using the plastic pry tool.
• Remove the screws securing the battery bracket using the Phillips #00 screwdriver.
• Disconnect the battery connector carefully using the spudger.
• Use the pull tabs on the battery to lift it out. If the battery is hard to remove, use a plastic pry tool to gently lift it, taking care not to damage other components.
• Place the new battery in the slot and reconnect the battery connector.
• Secure the battery bracket with screws.
• Reattach the back cover.
• Power on the device to ensure the new battery is functioning properly.

3. Camera Module Replacement

• Power off the Oppo Reno 8 5G.
• Remove the back cover using the plastic pry tool.
• Locate the camera modules and remove the screws securing them using the Phillips #00 screwdriver.
• Disconnect the camera module connectors using ESD-safe tweezers.
• Gently remove the faulty camera module.
• Insert the new camera module and reconnect the connectors.
• Secure the new camera module with screws.
• Reattach the back cover.
• Power on the device and test the new camera module to ensure it is functioning correctly.