Oppo Reno 8 Lite spare parts

Oppo Reno 8 Lite Technical Characteristics

The Oppo Reno 8 Lite is a mid-range smartphone with a variety of appealing features and specifications. Here are the key technical characteristics:

• Display: 6.43 inches, AMOLED, 1080 x 2400 pixels
• Processor: Qualcomm Snapdragon 695 5G
• RAM: 8GB
• Internal Storage: 128GB
• Operating System: Android 11, ColorOS 11.1
• Rear Camera: Triple 64 MP + 2 MP + 2 MP
• Front Camera: 16 MP
• Battery: 4500 mAh, Fast Charging 33W
• Connectivity: 5G, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, USB Type-C
• Fingerprint Sensor: Under-display, optical

Instructions on How to Replace Oppo Reno 8 Lite Repuestos

Replacing components (repuestos) on an Oppo Reno 8 Lite should be done carefully and meticulously. Follow these detailed instructions to ensure a successful replacement:

Required Tools

• Small Phillips and flathead screwdrivers
• Plastic opening tools
• Suction cup
• Pry tool
• Adhesive strips
• Antistatic wrist strap

Step-by-Step Instructions

Step 1: Power Off the Device

Ensure the Oppo Reno 8 Lite is completely powered off before beginning any repair work.

Step 2: Remove the SIM Tray

Using a SIM ejector tool or a similar object, remove the SIM tray from the device.

Step 3: Remove the Back Cover

• Use a hairdryer or heat gun to gently heat the edges of the back cover to soften the adhesive.
• Place the suction cup on the back cover and pull gently to create a gap.
• Insert a plastic opening tool into the gap and carefully pry around the edges to release the clips and adhesive.

Step 4: Disconnect the Battery

• Use the Phillips screwdriver to remove the screws securing the battery connector shield.
• Carefully lift the shield off and use the plastic spudger to disconnect the battery connector from the motherboard.

Step 5: Remove and Replace the Desired Component

For example, to replace the display:

• Disconnect the display cable from the motherboard.
• Use the pry tool to lift and remove the old display.
• Clean any residual adhesive from the frame.
• Apply new adhesive strips to the frame.
• Place the new display onto the frame and press gently to secure it.
• Reconnect the display cable to the motherboard.

Step 6: Reassemble the Device

• Reconnect the battery connector to the motherboard.
• Replace and secure the battery connector shield with screws.
• Carefully align and press the back cover back into place, ensuring it is securely attached.

Step 7: Power On and Test

Power on the Oppo Reno 8 Lite and test the new component to ensure it is functioning correctly.

By following these detailed instructions, you should be able to successfully replace components on your Oppo Reno 8 Lite. If you encounter any issues, consider seeking professional assistance to avoid further damage to the device.