Oppo Reno 8 Pro spare parts

Technical Characteristics of Oppo Reno 8 Pro Repuestos

The Oppo Reno 8 Pro is a high-performing smartphone, and its repuestos (replacement parts) are designed to ensure the phone maintains its efficiency and functionality after repair. Here are the technical characteristics of some commonly needed Oppo Reno 8 Pro repuestos:

Screen Replacement

• Type: AMOLED, 1B colors, 120Hz, HDR10+
• Size: 6.7 inches, 108.0 cm² (~90.9% screen-to-body ratio)
• Resolution: 1080 x 2412 pixels, 20:9 ratio (~394 ppi density)
• Protection: Corning Gorilla Glass 5

Battery

• Type: Li-Po 4500 mAh, non-removable
• Charging: Fast charging 65W, 100% in 31 min (advertised)

Camera Module

• Main Camera: Triple - 50 MP, f/1.8, 23mm (wide), 1/1.56"", 1.0µm, dual pixel PDAF, OIS
• Ultra-wide Camera: 8 MP, f/2.2, 16mm, 112˚, 1/4.0"", 1.12µm
• Macro Camera: 2 MP, f/2.4
• Front Camera: 32 MP, f/2.4, 24mm (wide), 1/2.74"", 0.8µm

Other parts such as the motherboard, standalone components, and buttons are also available though their details would slightly vary based on the version of the model.

Instructions on How to Replace Oppo Reno 8 Pro Repuestos

1. Screen Replacement

Tools Needed: Phillips screwdriver, suction cup, plastic prying tools, tweezers, adhesive glue

1. Power off your Oppo Reno 8 Pro and remove the SIM card tray.
2. Use a heating device to heat along the edges of the phone to soften the adhesive.
3. Use a suction cup to gently lift the back cover and insert a plastic prying tool to carefully separate the adhesive. Make sure to gently pry around the edges.
4. Once the back cover is removed, use the Phillips screwdriver to remove the screws securing the mid-frame.
5. Disconnect the battery connector to prevent any power-related issues.
6. Locate the screen connector and gently disconnect it using a prying tool.
7. Heat the front screen edges to soften the adhesive and use the suction cup and prying tools to remove the broken screen.
8. Carefully place the new screen in position and reconnect the screen connector.
9. Reassemble the mid-frame, ensuring all screws are securely tightened.
10. Reconnect the battery connector and place the back cover, pressing firmly to ensure it adheres properly. If necessary, use adhesive glue.
11. Turn on the phone to test the new screen functionality.

2. Battery Replacement

Tools Needed: Phillips screwdriver, plastic prying tools, tweezers

1. Power off your Oppo Reno 8 Pro and remove the SIM card tray.
2. Use a heating device to heat along the edges of the phone to soften the adhesive.
3. Use a suction cup to gently lift the back cover and insert a plastic prying tool to carefully separate the adhesive. Make sure to gently pry around the edges.
4. Once the back cover is removed, use the Phillips screwdriver to remove the screws securing the mid-frame.
5. Disconnect the battery connector using the prying tool.
6. Gently lift the old battery using a plastic prying tool. Avoid using too much force to prevent damage.
7. Place the new battery in the compartment, ensuring it aligns properly.
8. Reconnect the battery connector and reassemble the mid-frame, ensuring all screws are securely tightened.
9. Place the back cover, pressing firmly to ensure it adheres properly. If necessary, use adhesive glue.
10. Turn on the phone to test the new battery functionality.

3. Camera Module Replacement

Tools Needed: Phillips screwdriver, plastic prying tools, tweezers

1. Power off your Oppo Reno 8 Pro and remove the SIM card tray.
2. Use a heating device to heat along the edges of the phone to soften the adhesive.
3. Use a suction cup to gently lift the back cover and insert a plastic prying tool to carefully separate the adhesive. Make sure to gently pry around the edges.
4. Once the back cover is removed, use the Phillips screwdriver to remove the screws securing the mid-frame.
5. Disconnect the battery connector and locate the camera module connectors.
6. Gently disconnect the camera module connectors using the prying tool.
7. Remove the old camera module and place the new camera module in the correct position.
8. Reconnect the camera module connectors and battery connector.
9. Reassemble the mid-frame, ensuring all screws are securely tightened.
10. Place the back cover, pressing firmly to ensure it adheres properly. If necessary, use adhesive glue.
11. Turn on the phone to test the new camera module functionality.

By following these detailed instructions, you can successfully replace various components of the Oppo Reno 8 Pro. Remember to handle all parts carefully and ensure all components are properly aligned before reassembling the device.