Oppo Reno 9 Pro Plus 5G spare parts

Technical Characteristics of Oppo Reno 9 Pro Plus 5G Repuestos

The Oppo Reno 9 Pro Plus 5G is a premium smartphone with a variety of parts and components that ensure its smooth operation. Below are the key technical characteristics of the replacement parts (repuestos) for the Oppo Reno 9 Pro Plus 5G:

Screen

• Type: AMOLED, 1B colors, 120Hz
• Size: 6.7 inches, 108.0 cm2 (~90.9% screen-to-body ratio)
• Resolution: 1080 x 2412 pixels, 20:9 ratio (~394 ppi density)
• Protection: Corning Gorilla Glass 5

Battery

• Type: Li-Po 4500 mAh, non-removable
• Charging: Fast charging 60W, 1-100% in 38 min (advertised)

Rear Camera

• Main: 50 MP, f/1.8, 24mm (wide), 1/1.56"", 1.0µm, PDAF, OIS
• Secondary: 8 MP, f/2.2, 112˚ (ultrawide)
• Tertiary: 2 MP, f/2.4, (macro)

Front Camera

• Type: 32 MP, f/2.4, 24mm (wide)

Other Components

• Chipset: Qualcomm SM8350 Snapdragon 8 Gen 1 (4 nm)
• Memory: 256GB 8GB RAM, 256GB 12GB RAM, UFS 3.1
• Operating System: Android 12, ColorOS 12

Instructions on How to Replace Oppo Reno 9 Pro Plus 5G Repuestos

Replacing the parts of an Oppo Reno 9 Pro Plus 5G requires precision and care. Follow the detailed instructions below to safely replace the components:

Tools You Will Need

• Plastic Pry Tools
• Suction Cup
• Small Phillips Screwdriver
• SIM Ejector Tool
• Adhesive Strips
• Antistatic Wrist Strap (optional but recommended)

Steps to Replace the Screen

1. Power Off: Ensure the phone is turned off to prevent any damage.
2. Remove SIM Card Tray: Use a SIM ejector tool to remove the SIM card tray.
3. Apply Heat: Gently heat the edges of the screen using a heat gun or hairdryer to soften the adhesive.
4. Use Suction Cup: Place the suction cup on the screen and gently lift to create a gap.
5. Insert Pry Tool: Insert a plastic pry tool into the gap and carefully run it around the phone to loosen the adhesive.
6. Remove Screen: Once the adhesive is loose, gently lift the screen away from the device.
7. Disconnect Cables: Carefully disconnect the display cables connected to the motherboard.
8. Install New Screen: Connect the cables of the new screen to the motherboard.
9. Adhere New Screen: Place the new screen on the device and ensure it is aligned properly. Apply pressure to secure it with the adhesive.
10. Reassemble: Reinsert the SIM card tray and power on the device to test the new screen.

Steps to Replace the Battery

1. Power Off: Ensure the phone is turned off to prevent any damage.
2. Remove Back Cover: Use a heat gun or hairdryer to heat the edges of the back cover. Insert a plastic pry tool and gently work around the device to lift the back cover.
3. Disconnect Battery Connector: Locate the battery connector on the motherboard and carefully disconnect it.
4. Remove Battery: Use a pull tab or a plastic card to lift the battery out of its compartment carefully. If there is adhesive, it may take some effort to remove the battery.
5. Insert New Battery: Place the new battery in the compartment and connect it to the motherboard.
6. Reattach Back Cover: Use adhesive strips to secure the back cover or reattach the cover if it has reusable adhesive.
7. Reassemble: Power on the device to ensure the new battery is functioning correctly.

Additional Tips

• Work Slowly: Take your time to avoid damaging delicate components.
• Keep Screws Organized: Use a magnetic mat or containers to keep screws from getting lost.
• Check Connections: Ensure all cables and connectors are firmly in place before reassembling the device.

By following these instructions, you can replace the necessary parts in your Oppo Reno 9 Pro Plus 5G safely and efficiently. Always exercise caution and consider seeking professional help if you are unsure.