Oppo Reno spare parts

Technical Characteristics of Oppo Reno Repuestos

The Oppo Reno series comes with a range of replacement parts (repuestos) to ensure that your device maintains peak performance. Here's a list of the main technical characteristics of Oppo Reno repuestos:

• Display: AMOLED, 1080 x 2340 pixels, Gorilla Glass 6
• Battery: Non-removable Li-Po 3765 mAh, supports VOOC flash charge
• Camera: Dual: 48 MP, f/1.7, 1/2.0"", 0.8µm, PDAF, OIS + 5 MP, f/2.4, depth sensor
• Processor: Qualcomm Snapdragon 710
• RAM/Storage: Configurations include 6GB/128GB and 8GB/256GB
• Operating System: Android 9.0 (Pie); ColorOS 6
• Others: Under-display fingerprint sensor, USB-C port

Instructions for Replacing Oppo Reno Repuestos

Replacing parts of the Oppo Reno can be technical, but with detailed steps, you can successfully perform the replacement. Below are the instructions:

1. Replacing the Display

Follow these steps to replace a damaged Oppo Reno display:

• Power off the device and remove the SIM card tray.
• Use a heat gun to soften the adhesive around the edges of the back cover.
• Once heated, use a suction cup and a plastic opening tool to carefully pry off the back cover.
• Remove the screws securing the mid-frame and gently lift it off the device.
• Disconnect the battery connector to avoid any electrical issues.
• Locate the display connector, disconnect it, and remove any securing screws.
• Use a plastic spudger to carefully lift off the damaged display.
• Apply new adhesive to the frame and attach the new display to the device.
• Reconnect the display connector and battery connector.
• Reassemble the mid-frame, secure it with screws, and reattach the back cover.
• Power on the device and check the display functionality.

2. Replacing the Battery

To replace the Oppo Reno battery, follow these steps:

• Power off the device and remove the SIM card tray.
• Use a heat gun to soften the adhesive around the edges of the back cover.
• Using a suction cup and a plastic opening tool, carefully pry off the back cover.
• Remove the screws securing the mid-frame and gently lift it off the device.
• Disconnect the battery connector.
• Use a plastic spudger to carefully lift the battery from the device. Note that the battery may have some adhesive securing it to the frame.
• Place the new battery in the frame and reconnect the battery connector.
• Reassemble the mid-frame, secure it with screws, and reattach the back cover.
• Power on the device and check the battery functionality.

3. Replacing the Camera

To replace the Oppo Reno camera, follow these steps:

• Power off the device and remove the SIM card tray.
• Use a heat gun to soften the adhesive around the edges of the back cover.
• Using a suction cup and a plastic opening tool, carefully pry off the back cover.
• Remove the screws securing the mid-frame and gently lift it off the device.
• Locate and disconnect the camera module connector.
• Remove the screws securing the camera module and carefully lift it out.
• Insert the new camera module and secure it with screws.
• Reconnect the camera module connector.
• Reassemble the mid-frame, secure it with screws, and reattach the back cover.
• Power on the device and test the camera functionality.

It is recommended to perform these replacements in a clean environment to avoid dust or debris entering the device. If you are not confident in doing these replacements yourself, seek professional help.