Oppo Reno4 Z Spare Parts

Oppo Reno4 Z Repuestos - Technical Characteristics and Replacement Instructions

Technical Characteristics of Oppo Reno4 Z Repuestos

Below are the key technical characteristics of the Oppo Reno4 Z spare parts:

• Display: 6.57-inch IPS LCD, 1080 x 2400 pixels resolution
• Chipset: MediaTek MT6873V Dimensity 800 5G
• RAM: 8GB
• Internal Storage: 128GB
• Main Camera: Quad 48 MP + 8 MP + 2 MP + 2 MP
• Front Camera: Dual 16 MP + 2 MP
• Battery: 4000 mAh, non-removable
• Operating System: Android 10, ColorOS 7.1

Instructions on How to Replace Oppo Reno4 Z Repuestos

Please follow these detailed instructions to replace the various spare parts of your Oppo Reno4 Z carefully and safely:

Tools Required:

• Phillips head screwdriver
• Plastic opening tools
• Prying tool
• Suction cup
• Tweezers
• Heat gun or hairdryer

Steps to Replace the Display:

1. Power off your Oppo Reno4 Z completely.

2. Remove the SIM card tray using a SIM eject tool.

3. Apply heat around the edges of the display using a heat gun or hairdryer. This will soften the adhesive.

4. Use a suction cup to lift a small gap between the display and the frame.

5. Insert a plastic prying tool into the gap and carefully pry around the edges to release the adhesive. Be gentle to avoid damaging any internal components.

6. Detach the display connectors once you have loosened the display. Place the old display aside.

7. Connect the new display to the connectors.

8. Carefully place the new display onto the frame and press firmly to secure the adhesive.

9. Power on the device to test the new display before securing all edges.

Steps to Replace the Battery:

1. Power off the device and remove the SIM card tray.

2. Remove the back cover by applying heat around the edges and using a prying tool.

3. Unscrew the screws securing the battery connector bracket and remove the bracket.

4. Disconnect the battery connector using a plastic tool.

5. Gently pry up the battery using a plastic tool. Be cautious not to bend or puncture the battery.

6. Remove any adhesive strips securing the battery.

7. Place the new battery into the compartment and reconnect the connector.

8. Reattach the battery connector bracket and screw it in place.

9. Secure the back cover by pressing it firmly and applying slight heat if necessary to ensure proper adhesion.

Additional Repairs:

For other component replacements, such as cameras, buttons, or speakers, follow similar steps to open the device and access the affected area. Always handle internal parts with care and ensure all connectors are properly attached before reassembling the device.

We strongly recommend seeking professional assistance if you are not confident in performing these repairs yourself to avoid any further damage to your device.