Oppo U705 spare parts

Technical Characteristics of Oppo U705 Repuestos

The Oppo U705, also known as the Oppo Find Way, is equipped with various replaceable components. The most commonly replaced parts, known as ""repuestos,"" include the screen, battery, camera, and charging port. Below are the detailed specifications and technical characteristics of these components:

1. Screen

• Type: IPS LCD capacitive touchscreen
• Size: 4.5 inches
• Resolution: 540 x 960 pixels
• Protection: Corning Gorilla Glass 2

2. Battery

• Type: Lithium Polymer (Li-Po)
• Capacity: 2020 mAh
• Non-Removable

3. Camera

• Primary: 8 MP, AF
• Features: LED Flash, HDR, Panorama
• Video: 1080p@30fps

4. Charging Port

• Type: Micro USB 2.0

Instructions for Replacing Oppo U705 Repuestos

Replacing parts in the Oppo U705 requires careful attention to detail to avoid damaging the device. Below are detailed instructions for replacing the most common components:

1. Screen Replacement

• Power off the device and remove the SIM card tray.
• Heat the edges of the screen to soften the adhesive. Use a heat gun or a hair dryer.
• Carefully use a plastic opening tool to lift and separate the screen from the frame.
• Disconnect the display cable gently from the motherboard.
• Connect the new screen to the motherboard by attaching the display cable.
• Align the new screen with the frame and press down gently to secure it.
• Reinsert the SIM card tray and power on the device to test the new screen.

2. Battery Replacement

• Power off the device and remove the SIM card tray.
• Use a screwdriver to remove the screws securing the back cover.
• Use a plastic opening tool to separate the back cover from the frame.
• Disconnect the battery connector from the motherboard.
• Gently lift and remove the old battery from its compartment.
• Place the new battery into the compartment and connect the battery connector to the motherboard.
• Reattach the back cover by aligning it with the frame and screwing it in place.
• Reinsert the SIM card tray and power on the device to test the new battery.

3. Camera Replacement

• Power off the device and remove the SIM card tray.
• Use a screwdriver to remove the screws securing the back cover.
• Use a plastic opening tool to separate the back cover from the frame.
• Locate the camera module on the motherboard.
• Disconnect the camera connector from the motherboard.
• Remove the old camera module from its slot.
• Place the new camera module into the slot and connect the camera connector to the motherboard.
• Reattach the back cover by aligning it with the frame and screwing it in place.
• Reinsert the SIM card tray and power on the device to test the new camera.

4. Charging Port Replacement

• Power off the device and remove the SIM card tray.
• Use a screwdriver to remove the screws securing the back cover.
• Use a plastic opening tool to separate the back cover from the frame.
• Locate the charging port assembly on the motherboard.
• Disconnect the flex cable connector leading to the charging port assembly.
• Remove the screws or clips securing the charging port assembly to the frame.
• Carefully remove the old charging port assembly.
• Install the new charging port assembly and secure it with screws or clips.
• Reconnect the flex cable connector to the motherboard.
• Reattach the back cover by aligning it with the frame and screwing it in place.
• Reinsert the SIM card tray and power on the device to test the new charging port.