Oukitel C15 Pro spare parts

Oukitel C15 Pro Technical Characteristics

Technical Specifications

Display: 6.088 inches, 600 x 1280 pixels
Processor: Mediatek MT6761 Helio A22, Quad-core 2.0 GHz
RAM: 2GB
Storage: 16GB, expandable up to 256GB via microSD
Camera: Dual rear 8 MP + 2 MP, front 5 MP
Battery: 3200 mAh
Operating System: Android 9.0 (Pie)

Instructions for Replacing Oukitel C15 Pro Repuestos

Required Tools

• Phillips screwdriver
• Plastic opening tool
• SIM card ejector tool
• Tweezers
• Suction cup
• Spudger
• Adhesive tape (optional)

Step-by-Step Instructions

1. Power Off the Device

Ensure the Oukitel C15 Pro is completely powered off before starting the replacement process.

2. Remove the SIM Card Tray

Use the SIM card ejector tool to remove the SIM card tray from the device.

3. Separate the Back Cover

Use a plastic opening tool to gently pry open the back cover of the phone. Work around the edges until the cover is completely detached.

4. Disconnect the Battery

Locate the battery connector and use a spudger to carefully disconnect the battery from the motherboard. This step is crucial to prevent any electrical damage during the replacement process.

5. Remove the Battery (If required)

If you need to replace the battery, carefully lift it out using a plastic opening tool. Be mindful of any adhesive strips underneath.

6. Remove the Screws

Use a Phillips screwdriver to remove all screws securing the internal components that need to be replaced (e.g., motherboard, camera module, etc.).

7. Replace the Faulty Component

Carefully remove the faulty component with tweezers and replace it with the new part. Make sure the new part is properly aligned and seated.

8. Reassemble the Device

• Reconnect all internal components to the motherboard.
• Replace all screws to secure the components in place.
• Reconnect the battery to the motherboard.

9. Reattach the Back Cover

Snap the back cover back into place, ensuring all edges are securely clipped.

10. Reinsert the SIM Card Tray

Place the SIM card tray back into its slot.

11. Power On the Device

Power on the Oukitel C15 Pro and test the functionality of the replaced components.

If you followed these steps carefully, your Oukitel C15 Pro should now be fully functional with the new replacement parts.