Oukitel C16 Pro spare parts

Technical Characteristics of Oukitel C16 Pro Repuestos

Overview

The Oukitel C16 Pro is a budget-friendly smartphone that comes with various replaceable parts (repuestos). Here are the primary technical characteristics of its repuestos:

Display

• Screen Size: 5.71 inches
• Resolution: 720 x 1520 pixels
• Technology: IPS LCD

Battery

• Capacity: 2600 mAh
• Type: Li-Ion, removable

Camera

• Rear Camera: 8 MP + 2 MP
• Front Camera: 5 MP

Processor

• CPU: Quad-core 2.0 GHz Cortex-A53
• Chipset: MediaTek MT6761 Helio A22

Memory

• RAM: 3 GB
• Internal Storage: 32 GB
• Expandable Storage: microSD, up to 128 GB

Instructions on How to Replace Oukitel C16 Pro Repuestos

Tools Needed

• Plastic Pry Tools
• Small Phillips Screwdriver
• SIM Card Ejector Tool
• Tweezers
• Adhesive Strips (for reattaching)

Step-by-Step Instructions

1. Power Down and Remove SIM Card

Before you begin, power down your Oukitel C16 Pro. Use the SIM card ejector tool to remove the SIM tray.

2. Remove Back Cover

Use a plastic pry tool to gently lift the back cover off the phone. Start at one corner and work your way around until the cover is completely detached.

3. Disconnect the Battery

• Locate the battery connector.
• Use a plastic pry tool to disconnect the battery gently.

4. Remove the Battery

Use the plastic pry tools to lift the battery carefully from its compartment.

5. Remove Screws and Disconnect Flex Cables

• Use the Phillips screwdriver to remove the screws holding down the mid-frame.
• Use the pry tool to disconnect all visible flex cables connecting components such as the screen, camera, and charging port.

6. Remove and Replace the Component

If you are replacing a specific part (e.g., the screen or camera), use the appropriate tools to remove the faulty component. Replace it with the new repuesto.

7. Reconnect Flex Cables and Screws

• Once the new component is in place, reconnect all the flex cables.
• Reinsert and tighten the screws to secure the mid-frame.

8. Reinstall the Battery

Place the battery back into its compartment and reconnect it using the plastic pry tool.

9. Reattach the Back Cover

Line up the back cover with the device and press it firmly until it snaps back into place. Ensure all edges are securely attached.

10. Power On the Device

Insert the SIM card back into the SIM tray and power on the device to make sure everything is functioning correctly.