Oukitel C17 Pro repuestos

Technical Characteristics of Oukitel C17 Pro Repuestos

The Oukitel C17 Pro is equipped with a variety of components that can be replaced or repaired to ensure optimal performance. Below are the key technical specifications of the main replacement parts (repuestos):

• Display: 6.35 inches, HD+ 720x1560 pixels
• Processor: MediaTek Helio P23 MT6763, Octa-core, 2.0 GHz
• RAM: 4 GB
• Storage: 64 GB (expandable via MicroSD up to 128 GB)
• Camera: Triple rear cameras (13 MP + 5 MP + 2 MP), 5 MP front camera
• Battery: 3900 mAh, non-removable
• Operating System: Android 9 Pie
• Connectivity: 4G, Wi-Fi 802.11 a/b/g/n, Bluetooth 4.2, GPS
• Other features: Fingerprint sensor, Face unlock, Dual SIM

Instructions on How to Replace Oukitel C17 Pro Repuestos

Replacing components of the Oukitel C17 Pro requires careful attention to detail and the right tools. Follow these instructions for a successful replacement process:

1. Tools Needed

• Small Phillips screwdriver
• Plastic opening tools
• Suction cup tool
• Spudger
• SIM card ejector tool
• Replacement parts (e.g., screen, battery, camera modules)

2. Safety First

• Power off your Oukitel C17 Pro and remove the SIM card tray.
• Make sure you work on a clean, static-free surface.
• Use appropriate safety gear like antistatic wristbands.

3. Removing the Back Cover

• Use the SIM card ejector tool to remove the SIM card tray.
• Insert a plastic opening tool or a spudger between the back cover and the frame of the phone.
• Carefully slide the tool around the edges to release the clips that hold the back cover in place.
• Gently lift off the back cover once all clips are released.

4. Disconnecting the Battery

• Locate the battery connector on the motherboard.
• Use a spudger to gently pry the battery connector off the motherboard.

5. Removing the Battery

• Remove the screws securing the battery bracket if applicable.
• Use a plastic opening tool to carefully lift the battery from the adhesive. Be careful not to puncture or bend the battery.

6. Replacing the Display

• Disconnect the display connector from the motherboard.
• Remove any screws securing the display assembly if applicable.
• Use a suction cup tool to carefully lift the old display from the frame.
• Align and attach the new display to the phone frame.
• Reconnect the display connector to the motherboard.

7. Replacing Camera Modules

• Locate the camera module and its connectors on the motherboard.
• Use a spudger to disconnect the camera connector(s).
• Carefully remove the old camera module.
• Replace it with the new module and reconnect the connectors.

8. Reassembling the Phone

• Reconnect the battery connector to the motherboard.
• Replace the back cover, ensuring it clicks into place around the edges.
• Reinsert the SIM card tray.
• Power on the Oukitel C17 Pro to test the new components.

By following these steps, you can successfully replace the most common components of the Oukitel C17 Pro. Always ensure you have properly powered off and disconnected the device before attempting any repairs.