Oukitel C19 spare parts

Oukitel C19 Repuestos - Technical Characteristics

The Oukitel C19 is known for its robust design and reliable performance. Below are the technical characteristics of the Oukitel C19 repuestos (replacement parts):

Technical Characteristics

• Screen: 6.49 inches, 720 x 1560 pixels
• Processor: MediaTek MT6737
• RAM: 2 GB
• Internal Storage: 16 GB (Expandable via microSD)
• Battery: 4000 mAh
• Front Camera: 5 MP
• Rear Camera: Quad 13 MP + 2 MP + 2 MP + 5 MP
• Operating System: Android 10

Instructions for Replacing Oukitel C19 Repuestos

Replacing parts in your Oukitel C19 can be done with the right tools and careful steps. Below are detailed instructions for replacing various repuestos:

Tools Required

• Precision screwdrivers
• Plastic opening tools
• Tweezers
• Suction cup
• Replacement part (screen, battery, etc.)
• Heat gun (if replacing the screen)

Step-by-Step Instructions

1. Power Off the Device

Ensure that the Oukitel C19 is powered off completely before starting any replacement procedure.

2. Remove the Back Cover

Use the plastic opening tools to pry open the back cover gently. Start from one corner and work your way around the edges.

3. Disconnect the Battery

Locate the battery connector and use a plastic tool to gently lift and disconnect it. This step is crucial for safety.

4. Remove the Screws

Using the precision screwdrivers, remove all the screws securing the internal components. Keep track of the screws as you will need them for reassembly.

5. Replace the Screen

If you are replacing the screen, use a heat gun to warm the edges of the screen to loosen the adhesive. Use the suction cup to lift the screen gently and the plastic tools to remove it completely. Install the new screen by aligning it properly and pressing it into place.

6. Replace the Battery

If replacing the battery, you can lift the old battery using the plastic tool once screws and adhesive strips (if any) are removed. Place the new battery in position and reconnect the battery connector.

7. Reassemble the Device

Carefully reassemble all the components by following the disassembly steps in reverse order. Make sure all connectors are properly seated and screws are securely fastened.

8. Power On the Device

Once everything is reassembled, power on your Oukitel C19 to test if the replacement was successful.

If the device does not power on or if any component is not functioning correctly, recheck the connections and ensure all components are correctly installed.

By following these detailed instructions, you should be able to replace various parts of your Oukitel C19 successfully. Always handle the internal components with care and take your time to avoid any damage.