Oukitel C21 Pro spare parts

Technical Characteristics of Oukitel C21 Pro Repuestos

The Oukitel C21 Pro is a robust and reliable smartphone known for its impressive specs and performance. Below are the technical characteristics of the key repuestos (replacement parts) for the Oukitel C21 Pro:

1. Screen

• Size: 6.39 inches
• Type: IPS LCD
• Resolution: 720 x 1560 pixels
• Touchscreen: Capacitive

2. Battery

• Capacity: 4000mAh
• Type: Li-Polymer
• Charging: Fast charging support

3. Camera

• Main Camera: 16 MP + 5 MP + 2 MP
• Front Camera: 8 MP

4. Processor

• CPU: MediaTek Helio P60
• GPU: ARM Mali-G72 MP3

Instructions for Replacing Oukitel C21 Pro Repuestos

Replacing components in your Oukitel C21 Pro requires precision and care. Follow these detailed steps to replace various repuestos:

1. Screen Replacement

Tools Required: Phillips screwdriver, plastic prying tools, suction cup, tweezers.

• 1. Power off the device and remove the SIM card tray.
• 2. Use the suction cup to carefully pull the screen away from the body of the phone.
• 3. Insert the plastic prying tool and gently work around the edges to separate the screen from the frame.
• 4. Disconnect the ribbon cable connected to the motherboard.
• 5. Attach the new screen by connecting the ribbon cable and ensuring it is securely fastened.
• 6. Press the new screen into place gently and ensure it is properly aligned.
• 7. Power on the device to check functionality. If all is well, power off the device again to secure all parts.

2. Battery Replacement

Tools Required: Phillips screwdriver, plastic prying tools.

• 1. Power off the device and remove the back cover using the prying tool.
• 2. Locate the battery and disconnect it from the motherboard by gently pulling the connector.
• 3. Carefully remove the battery from its compartment.
• 4. Place the new battery into the compartment and reconnect it to the motherboard.
• 5. Replace and secure the back cover.
• 6. Power on the device to ensure the new battery is functioning correctly.

3. Camera Replacement

Tools Required: Phillips screwdriver, plastic prying tools, tweezers.

• 1. Power off the device and remove the back cover using a prying tool.
• 2. Locate the camera module and disconnect the connectors attached to the motherboard.
• 3. Use the tweezers to carefully remove the camera module from its slot.
• 4. Take the new camera module and place it into the slot, ensuring it is securely seated.
• 5. Reconnect the camera module's connectors to the motherboard.
• 6. Replace and secure the back cover.
• 7. Power on the device and test the camera functionality.

By following these instructions, you can successfully replace key components of your Oukitel C21 Pro. If you encounter any issues, consider seeking professional assistance.